ITI Surveyor 2nd Year Mock Test – 2 July 17, 2025 ITI Surveyor 2nd Year Mock Test – 2 | Instant Feedback ITI Surveyor 2nd Year Mock Test – 2 आईटीआई सर्वेयर द्वितीय वर्ष मॉक टेस्ट – 2 Time Left: 30:00 Test Complete! 1. What is a common site hazard for a surveyor?1. एक सर्वेक्षक के लिए एक आम साइट खतरा क्या है? a) Uneven ground / असमान जमीन b) Moving vehicles / चलते वाहन c) Falling objects / गिरती हुई वस्तुएं d) All of the above / उपरोक्त सभी 2. If a chain is too long, the measured distance will be:2. यदि एक चेन बहुत लंबी है, तो मापी गई दूरी होगी: a) More than the actual distance / वास्तविक दूरी से अधिक b) Less than the actual distance / वास्तविक दूरी से कम c) Equal to the actual distance / वास्तविक दूरी के बराबर d) Zero / शून्य 3. The Rise and Fall method provides a complete check on:3. राइज़ एंड फॉल विधि किस पर एक पूर्ण जांच प्रदान करती है: a) Backsights and Foresights only / केवल बैकसाइट्स और फोरसाइट्स b) The calculation of R.L.s of all points / सभी बिंदुओं के आर.एल. की गणना c) The first and last R.L. only / केवल पहले और आखिरी आर.एल. d) Intermediate sights only / केवल इंटरमीडिएट साइट्स 4. If the Fore Bearing of a line is 40°, its Back Bearing is:4. यदि एक रेखा का अग्र बियरिंग 40° है, तो इसका पश्च बियरिंग है: a) 40° b) 140° c) 220° d) 320° 5. The three-point problem is a method of:5. थ्री-पॉइंट प्रॉब्लम किसकी एक विधि है: a) Traversing / ट्रैवर्सिंग b) Radiation / विकिरण c) Resection / रिसेक्शन d) Intersection / प्रतिच्छेदन 6. An error that occurs in the same direction and tends to accumulate is known as a:6. एक त्रुटि जो एक ही दिशा में होती है और जमा होती जाती है, कहलाती है: a) Compensating Error / प्रतिकारी त्रुटि b) Random Error / यादृच्छिक त्रुटि c) Cumulative Error / संचयी त्रुटि d) Personal Error / व्यक्तिगत त्रुटि 7. The correction for Earth’s curvature is always:7. पृथ्वी की वक्रता के लिए सुधार हमेशा होता है: a) Positive / धनात्मक b) Negative / ऋणात्मक c) Zero / शून्य d) Either positive or negative / या तो धनात्मक या ऋणात्मक 8. A closed traverse is one which:8. एक बंद ट्रैवर्स वह है जो: a) Starts and ends at the same point / एक ही बिंदु पर शुरू और समाप्त होता है b) Is surveyed with a compass only / केवल एक कम्पास के साथ सर्वेक्षण किया जाता है c) Does not close on its starting point / अपने प्रारंभिक बिंदु पर बंद नहीं होता है d) Covers a very small area / बहुत छोटे क्षेत्र को कवर करता है 9. A scale of 1:1000 on a map means:9. एक नक्शे पर 1:1000 के पैमाने का मतलब है: a) 1 cm on map = 1 m on ground / नक्शे पर 1 सेमी = जमीन पर 1 मीटर b) 1 cm on map = 10 m on ground / नक्शे पर 1 सेमी = जमीन पर 10 मीटर c) 1 cm on map = 100 m on ground / नक्शे पर 1 सेमी = जमीन पर 100 मीटर d) 1 m on map = 1000 m on ground / नक्शे पर 1 मीटर = जमीन पर 1000 मीटर 10. An obstacle which obstructs both chaining and ranging is a:10. एक बाधा जो चेनिंग और रेंजिंग दोनों में बाधा डालती है, वह है: a) Pond / तालाब b) Building / इमारत c) River / नदी d) A small hill / एक छोटी पहाड़ी 11. A GTS Benchmark is established with:11. एक जीटीएस बेंचमार्क स्थापित किया जाता है: a) Low precision / निम्न परिशुद्धता के साथ b) Moderate precision / मध्यम परिशुद्धता के साथ c) High precision / उच्च परिशुद्धता के साथ d) No precision / कोई परिशुद्धता नहीं 12. Included angles in a traverse can be calculated from:12. एक ट्रैवर्स में आंतरिक कोणों की गणना किससे की जा सकती है: a) The lengths of the lines / रेखाओं की लंबाई से b) The elevations of the stations / स्टेशनों की ऊंचाई से c) The bearings of the lines / रेखाओं की बियरिंग से d) The area of the traverse / ट्रैवर्स के क्षेत्रफल से 13. The process of setting the plane table parallel to the position it occupied at previous stations is called:13. प्लेन टेबल को उस स्थिति के समानांतर सेट करने की प्रक्रिया जो उसने पिछले स्टेशनों पर कब्जा कर रखी थी, कहलाती है: a) Centering / सेंटरिंग b) Orientation / ओरिएंटेशन c) Leveling / लेवलिंग d) Sighting / साइटिंग 14. A 20-meter metric chain normally consists of:14. एक 20-मीटर मीट्रिक चेन में सामान्य रूप से होते हैं: a) 50 links / 50 कड़ियाँ b) 100 links / 100 कड़ियाँ c) 150 links / 150 कड़ियाँ d) 200 links / 200 कड़ियाँ 15. A survey line joining two points on the main survey lines is a:15. मुख्य सर्वेक्षण रेखाओं पर दो बिंदुओं को मिलाने वाली एक सर्वेक्षण रेखा है: a) Base line / बेस लाइन b) Check line / चेक लाइन c) Tie line / टाई लाइन d) Offset / ऑफसेट 16. The first aid procedure for a minor sprain is:16. एक मामूली मोच के लिए प्राथमिक उपचार प्रक्रिया है: a) Apply heat / गर्मी लगाना b) Walk it off / चलकर इसे ठीक करना c) R.I.C.E. (Rest, Ice, Compression, Elevation) / R.I.C.E. (आराम, बर्फ, संपीड़न, ऊंचाई) d) Massage the area / क्षेत्र की मालिश करना 17. A Total Station can measure:17. एक टोटल स्टेशन माप सकता है: a) Only angles / केवल कोण b) Only distances / केवल दूरियाँ c) Only elevations / केवल ऊँचाइयाँ d) Angles, distances, and elevations / कोण, दूरियाँ, और ऊँचाइयाँ 18. The process of solving the three-point problem can be done by:18. थ्री-पॉइंट प्रॉब्लम को हल करने की प्रक्रिया की जा सकती है: a) Bessel’s method / बेसेल की विधि b) Lehman’s method / लेहमन की विधि c) Bowditch’s method / बॉडिच की विधि d) Transit method / ट्रांजिट विधि 19. A drawing scale of “1 cm = 50 m” is an R.F. of:19. “1 सेमी = 50 मी” का एक ड्राइंग पैमाना किसका R.F. है: a) 1/50 b) 1/500 c) 1/5000 d) 1/5 20. The vertical axis of a theodolite is the axis about which it:20. एक थियोडोलाइट की ऊर्ध्वाधर धुरी वह धुरी है जिसके चारों ओर यह: a) Rotates in the horizontal plane / क्षैतिज तल में घूमता है b) Rotates in the vertical plane / ऊर्ध्वाधर तल में घूमता है c) Is leveled / समतल किया जाता है d) Is focused / फोकस किया जाता है 21. The main principle of chain surveying is to divide the area into a network of:21. चेन सर्वेक्षण का मुख्य सिद्धांत क्षेत्र को किसके नेटवर्क में विभाजित करना है: a) Squares / वर्गों b) Triangles / त्रिभुजों c) Rectangles / आयतों d) Circles / वृत्तों 22. Which instrument is most suitable for setting out a right angle accurately?22. एक समकोण को सटीक रूप से स्थापित करने के लिए कौन सा उपकरण सबसे उपयुक्त है? a) Ranging rod / रेंजिंग रॉड b) Chain / चेन c) Optical Square or Cross Staff / ऑप्टिकल स्क्वायर या क्रॉस स्टाफ d) Arrow / एरो 23. The area of a trapezoid is calculated by the formula:23. एक ट्रेपेज़ॉइड के क्षेत्रफल की गणना सूत्र द्वारा की जाती है: a) Length × Width / लंबाई × चौड़ाई b) 1/2 × (sum of parallel sides) × height / 1/2 × (समानांतर भुजाओं का योग) × ऊंचाई c) π × radius² / π × त्रिज्या² d) Side × Side / भुजा × भुजा 24. What is a key personal quality for a good surveyor?24. एक अच्छे सर्वेक्षक के लिए एक प्रमुख व्यक्तिगत गुण क्या है? a) Ability to work very fast / बहुत तेजी से काम करने की क्षमता b) Good judgement, honesty, and attention to detail / अच्छा निर्णय, ईमानदारी, और विस्तार पर ध्यान c) Physical strength / शारीरिक शक्ति d) Good at drawing sketches / स्केच बनाने में अच्छा 25. What is the primary purpose of a tripod?25. एक तिपाई का प्राथमिक उद्देश्य क्या है? a) To carry surveying instruments / सर्वेक्षण उपकरणों को ले जाना b) To provide a stable platform for mounting instruments / उपकरणों को माउंट करने के लिए एक स्थिर मंच प्रदान करना c) To measure distances / दूरियों को मापना d) To mark station points / स्टेशन बिंदुओं को चिह्नित करना ← Previous Next → Finish Test / टेस्ट खत्म करें