ITI Plumber 1st Year Mock Test – 4 July 24, 2025 ITI Plumber 1st Year Mock Test – 4 | Instant Feedback ITI Plumber 1st Year Mock Test – 4 आईटीआई प्लंबर प्रथम वर्ष मॉक टेस्ट – 4 Time Left: 30:00 Test Complete! 1. The tool used for making a flat surface on wood is a:1. लकड़ी पर एक सपाट सतह बनाने के लिए उपयोग किया जाने वाला उपकरण है: a) Saw / आरी b) Chisel / छेनी c) Plane / रंदा d) Hammer / हथौड़ा 2. A ‘mortise and tenon’ joint is a type of:2. एक ‘मोर्टिज़ एंड टेनन’ जोड़ एक प्रकार है: a) Framing joint / फ्रेमिंग जोड़ का b) Widening joint / चौड़ा करने वाले जोड़ का c) Lengthening joint / लंबा करने वाले जोड़ का d) Box joint / बॉक्स जोड़ का 3. Which of the following is a man-made wood product?3. निम्नलिखित में से कौन सा एक मानव निर्मित लकड़ी का उत्पाद है? a) Teak / टीक b) Pine / पाइन c) Plywood / प्लाईवुड d) Oak / ओक 4. The tool used to mark angles other than 90 degrees is a:4. 90 डिग्री के अलावा अन्य कोणों को चिह्नित करने के लिए उपयोग किया जाने वाला उपकरण है: a) Try square / ट्राई स्क्वायर b) Sliding bevel / स्लाइडिंग बेवल c) Marking gauge / मार्किंग गेज d) Steel rule / स्टील रूल 5. What is the main purpose of seasoning timber?5. लकड़ी की सीजनिंग का मुख्य उद्देश्य क्या है? a) To increase its weight / इसका वजन बढ़ाना b) To reduce its moisture content and prevent warping / इसकी नमी की मात्रा को कम करना और मुड़ने से रोकना c) To change its color / इसका रंग बदलना d) To make it softer / इसे नरम बनाना 6. A ‘mallet’ is a type of hammer with a head made of:6. एक ‘मैलेट’ एक प्रकार का हथौड़ा है जिसका सिर बना होता है: a) Steel / स्टील b) Wood, rubber, or plastic / लकड़ी, रबर, या प्लास्टिक c) Brass / पीतल d) Iron / लोहा 7. The joint used to join two pieces of wood at a corner at 45 degrees is a:7. 45 डिग्री पर एक कोने पर लकड़ी के दो टुकड़ों को जोड़ने के लिए उपयोग किया जाने वाला जोड़ है: a) Butt joint / बट जॉइंट b) Lap joint / लैप जॉइंट c) Miter joint / माइटर जॉइंट d) Dovetail joint / डोवटेल जॉइंट 8. The process of applying a protective, clear finish to wood is:8. लकड़ी पर एक सुरक्षात्मक, स्पष्ट फिनिश लगाने की प्रक्रिया है: a) Painting / पेंटिंग b) Varnishing / वार्निशिंग c) Staining / स्टेनिंग d) Seasoning / सीजनिंग 9. A ‘handsaw’ is used for:9. एक ‘हैंडसॉ’ का उपयोग किया जाता है: a) Making holes / छेद बनाने के लिए b) Cutting wood / लकड़ी काटने के लिए c) Driving nails / कीलें ठोंकने के लिए d) Smoothing wood / लकड़ी को चिकना करने के लिए 10. What is a key safety rule when using a chisel?10. छेनी का उपयोग करते समय एक प्रमुख सुरक्षा नियम क्या है? a) Always cut towards your body / हमेशा अपने शरीर की ओर काटें b) Keep the cutting edge sharp and cut away from your body / कटिंग एज को तेज रखें और अपने शरीर से दूर काटें c) Use a chisel with a loose handle / ढीले हैंडल वाली छेनी का उपयोग करें d) Use a steel hammer on a wooden handled chisel / लकड़ी के हैंडल वाली छेनी पर एक स्टील के हथौड़े का उपयोग करें 11. A ‘tenon’ is the _______ part of a mortise and tenon joint.11. एक ‘टेनन’ एक मोर्टिज़ और टेनन जोड़ का _______ हिस्सा है। a) Hole / छेद b) Projecting part / उभरा हुआ हिस्सा c) Glue / गोंद d) Pin / पिन 12. The tool used for cutting thin sheets of wood is a:12. लकड़ी की पतली चादरें काटने के लिए उपयोग किया जाने वाला उपकरण है: a) Rip saw / रिप सॉ b) Tenon saw / टेनन सॉ c) Coping saw / कोपिंग सॉ d) Panel saw / पैनल सॉ 13. The purpose of a ‘bench stop’ on a workbench is to:13. एक वर्कबेंच पर ‘बेंच स्टॉप’ का उद्देश्य है: a) Hold tools / औजारों को पकड़ना b) Prevent the workpiece from sliding while planning / योजना बनाते समय वर्कपीस को फिसलने से रोकना c) Measure the length of the workpiece / वर्कपीस की लंबाई मापना d) A decorative element / एक सजावटी तत्व 14. What is the most important personal protective equipment (PPE) in a carpentry workshop?14. एक बढ़ईगीरी की कार्यशाला में सबसे महत्वपूर्ण व्यक्तिगत सुरक्षा उपकरण (PPE) क्या है? a) Safety glasses / सुरक्षा चश्मा b) Hand gloves / हाथ के दस्ताने c) Dust mask / डस्ट मास्क d) All of the above / उपरोक्त सभी 15. The joint formed by cutting a recess in one piece to receive another is a:15. दूसरे को प्राप्त करने के लिए एक टुकड़े में एक अवकाश काटकर बनाया गया जोड़ है: a) Butt Joint / बट जॉइंट b) Lap Joint / लैप जॉइंट c) Dowel Joint / डॉवेल जॉइंट d) Miter Joint / माइटर जॉइंट 16. The tool used for marking a line parallel to an edge is a:16. एक किनारे के समानांतर एक रेखा को चिह्नित करने के लिए उपयोग किया जाने वाला उपकरण है: a) Try square / ट्राई स्क्वायर b) Marking gauge / मार्किंग गेज c) Steel rule / स्टील रूल d) Bevel / बेवल 17. Which of these is a softwood?17. इनमें से कौन सी एक नरम लकड़ी (softwood) है? a) Teak / टीक (सागौन) b) Oak / ओक c) Pine / पाइन (चीड़) d) Mahogany / महोगनी 18. The process of applying a clear, protective finish to wood is:18. लकड़ी पर एक स्पष्ट, सुरक्षात्मक फिनिश लगाने की प्रक्रिया है: a) Painting / पेंटिंग b) Varnishing or Lacquering / वार्निशिंग या लैकरिंग c) Staining / स्टेनिंग d) Bleaching / ब्लीचिंग 19. A ‘tenon’ is the _______ part of a mortise and tenon joint.19. एक ‘टेनन’ एक मोर्टिज़ और टेनन जोड़ का _______ हिस्सा है। a) Hole / छेद b) Projecting part / उभरा हुआ हिस्सा c) Glue / गोंद d) Pin / पिन 20. What is the most important rule for handling tools?20. औजारों को संभालने का सबसे महत्वपूर्ण नियम क्या है? a) Keep them sharp and clean / उन्हें तेज और साफ रखना b) Use the right tool for the job / काम के लिए सही उपकरण का उपयोग करना c) Store them properly after use / उपयोग के बाद उन्हें ठीक से स्टोर करना d) All of the above / उपरोक्त सभी 21. The tool used for cutting curves in wood is a:21. लकड़ी में वक्र काटने के लिए उपयोग किया जाने वाला उपकरण है: a) Tenon saw / टेनन सॉ b) Rip saw / रिप सॉ c) Coping saw or Jigsaw / कोपिंग सॉ या जिगसॉ d) Crosscut saw / क्रॉसकट सॉ 22. Which of these is a wood defect?22. इनमें से कौन सा एक लकड़ी का दोष है? a) Knot / गाँठ b) Warp / ताना c) Crack / दरार d) All of the above / उपरोक्त सभी 23. The tool used to drive a chisel is a:23. एक छेनी को चलाने के लिए उपयोग किया जाने वाला उपकरण है: a) Mallet / मैलेट b) Screwdriver / स्क्रूड्राइवर c) Wrench / रिंच d) Pliers / प्लायर्स 24. What should you do before starting a power tool?24. एक पावर टूल शुरू करने से पहले आपको क्या करना चाहिए? a) Check that all safety guards are in place / जांचें कि सभी सुरक्षा गार्ड अपनी जगह पर हैं b) Ensure the workpiece is securely clamped / सुनिश्चित करें कि वर्कपीस सुरक्षित रूप से क्लैंप किया गया है c) Wear appropriate PPE / उपयुक्त पीपीई पहनें d) All of the above / उपरोक्त सभी 25. A miter joint is typically cut at an angle of:25. एक माइटर जोड़ को आमतौर पर किस कोण पर काटा जाता है: a) 90 degrees / 90 डिग्री b) 60 degrees / 60 डिग्री c) 45 degrees / 45 डिग्री d) 30 degrees / 30 डिग्री ← Previous Next → Finish Test / टेस्ट खत्म करें