ITI Surveyor 1st Year Mock Test – 5 July 17, 2025 ITI Surveyor 1st Year Mock Test – 5 | Instant Feedback ITI Surveyor 1st Year Mock Test – 5 आईटीआई सर्वेयर प्रथम वर्ष मॉक टेस्ट – 5 Time Left: 30:00 Test Complete! 1. An error due to sag in a chain or tape is a:1. एक चेन या टेप में झोल के कारण होने वाली त्रुटि है: a) Compensating error / प्रतिकारी त्रुटि b) Negative cumulative error / ऋणात्मक संचयी त्रुटि c) Positive cumulative error / धनात्मक संचयी त्रुटि d) Personal error / व्यक्तिगत त्रुटि 2. The longest line in a chain survey which passes through the center of the area is the:2. चेन सर्वेक्षण में सबसे लंबी रेखा जो क्षेत्र के केंद्र से होकर गुजरती है, वह है: a) Check line / चेक लाइन b) Tie line / टाई लाइन c) Base line / बेस लाइन d) Offset line / ऑफसेट लाइन 3. If the Fore Bearing of a line is 120°, its Back Bearing is:3. यदि एक रेखा का अग्र बियरिंग 120° है, तो इसका पश्च बियरिंग है: a) 60° b) 240° c) 300° d) 120° 4. The operation of revolving a theodolite telescope in a vertical plane is called:4. एक थियोडोलाइट दूरबीन को एक ऊर्ध्वाधर तल में घुमाने की क्रिया कहलाती है: a) Swinging / स्विंगिंग b) Transiting / ट्रांजिटिंग c) Centering / सेंटरिंग d) Leveling / लेवलिंग 5. In leveling, a change point (CP) is a point where:5. लेवलिंग में, एक चेंज प्वाइंट (CP) एक बिंदु है जहाँ: a) Only a backsight is taken / केवल एक बैकसाइट ली जाती है b) Only a foresight is taken / केवल एक फोरसाइट ली जाती है c) Both a foresight and a backsight are taken / एक फोरसाइट और एक बैकसाइट दोनों ली जाती हैं d) The survey ends / सर्वेक्षण समाप्त होता है 6. The method of plane table surveying suitable for locating details from a single station is:6. एक ही स्टेशन से विवरण का पता लगाने के लिए उपयुक्त प्लेन टेबल सर्वेक्षण की विधि है: a) Intersection / प्रतिच्छेदन b) Traversing / ट्रैवर्सिंग c) Radiation / विकिरण d) Resection / रिसेक्शन 7. A contour line connects points of:7. एक कंटूर रेखा किन बिंदुओं को जोड़ती है: a) Equal elevation / समान ऊंचाई b) Equal bearing / समान बियरिंग c) Equal distance / समान दूरी d) Equal rainfall / समान वर्षा 8. The difference between the Fore Bearing and Back Bearing of a line should be exactly:8. एक रेखा के अग्र बियरिंग और पश्च बियरिंग के बीच का अंतर ठीक होना चाहिए: a) 90° b) 180° c) 270° d) 360° 9. What is a check line in chain surveying used for?9. चेन सर्वेक्षण में एक चेक लाइन का उपयोग किस लिए किया जाता है? a) To measure the longest line / सबसे लंबी रेखा को मापने के लिए b) To check the accuracy of the framework / ढांचे की सटीकता की जांच करने के लिए c) To locate interior details / आंतरिक विवरण का पता लगाने के लिए d) To mark the boundary / सीमा को चिह्नित करने के लिए 10. The bubble in the level tube of a leveling instrument moves to the _______ end if that end is raised.10. एक लेवलिंग उपकरण की लेवल ट्यूब में बुलबुला _______ सिरे की ओर बढ़ता है यदि उस सिरे को ऊपर उठाया जाता है। a) Lower / निचले b) Higher / ऊंचे c) Middle / मध्य d) It does not move / यह नहीं चलता है 11. A scale of 1cm = 20m is represented by the R.F.:11. 1सेमी = 20मी का पैमाना R.F. द्वारा दर्शाया गया है: a) 1/20 b) 1/200 c) 1/2000 d) 1/20000 12. The two main methods of levelling are the Rise and Fall method and the _______ method.12. लेवलिंग की दो मुख्य विधियाँ राइज़ एंड फॉल विधि और _______ विधि हैं। a) Height of Collimation (H.I.) / उपकरण की ऊंचाई (H.I.) b) Reciprocal Levelling / व्युत्क्रम लेवलिंग c) Profile Levelling / प्रोफाइल लेवलिंग d) Trigonometrical Levelling / त्रिकोणमितीय लेवलिंग 13. The main purpose of a plumb bob in surveying is to:13. सर्वेक्षण में एक साहुल (plumb bob) का मुख्य उद्देश्य है: a) Measure distance / दूरी मापना b) Transfer a point from the instrument to the ground (centering) / उपकरण से एक बिंदु को जमीन पर स्थानांतरित करना (सेंटरिंग) c) Mark a line / एक रेखा को चिह्नित करना d) Check the level / स्तर की जांच करना 14. What does the term “local attraction” refer to in compass surveying?14. कम्पास सर्वेक्षण में “स्थानीय आकर्षण” शब्द का क्या अर्थ है? a) The attraction between two magnets / दो चुंबकों के बीच आकर्षण b) The influence of nearby magnetic objects on the compass needle / आस-पास की चुंबकीय वस्तुओं का कम्पास सुई पर प्रभाव c) The Earth’s magnetic field / पृथ्वी का चुंबकीय क्षेत्र d) The difference between true north and magnetic north / यथार्थ उत्तर और चुंबकीय उत्तर के बीच का अंतर 15. A survey line that joins two main survey stations is called a:15. दो मुख्य सर्वेक्षण स्टेशनों को जोड़ने वाली एक सर्वेक्षण रेखा कहलाती है: a) Check line / चेक लाइन b) Base line / बेस लाइन c) Tie line / टाई लाइन d) Offset / ऑफसेट 16. The vertical circle on a theodolite is used to measure:16. एक थियोडोलाइट पर ऊर्ध्वाधर वृत्त का उपयोग मापने के लिए किया जाता है: a) Horizontal angles / क्षैतिज कोण b) Vertical angles / ऊर्ध्वाधर कोण c) Magnetic bearings / चुंबकीय बियरिंग d) Distances / दूरियाँ 17. A closed contour line with higher values inside represents a:17. अंदर की ओर उच्च मानों वाली एक बंद कंटूर रेखा दर्शाती है: a) Hill / एक पहाड़ी b) A pond or depression / एक तालाब या अवसाद c) A flat ground / एक समतल जमीन d) A vertical cliff / एक ऊर्ध्वाधर चट्टान 18. What is the main purpose of lettering in engineering drawing?18. इंजीनियरिंग ड्राइंग में अक्षर-लेखन (lettering) का मुख्य उद्देश्य क्या है? a) To make the drawing look artistic / ड्राइंग को कलात्मक दिखाने के लिए b) To convey information clearly and legibly / जानकारी को स्पष्ट रूप से और सुपाठ्य रूप से संप्रेषित करने के लिए c) To fill empty space on the drawing / ड्राइंग पर खाली जगह भरने के लिए d) To practice handwriting / लिखावट का अभ्यास करने के लिए 19. If a chain is found to be too short, the error is:19. यदि एक चेन बहुत छोटी पाई जाती है, तो त्रुटि है: a) Cumulative and positive / संचयी और धनात्मक b) Cumulative and negative / संचयी और ऋणात्मक c) Compensating / प्रतिकारी d) Not an error / कोई त्रुटि नहीं 20. The Reduced Level (R.L.) of a point is its:20. एक बिंदु का समानित तल (R.L.) है: a) Horizontal distance from the starting point / प्रारंभिक बिंदु से क्षैतिज दूरी b) Vertical height or depth with respect to a datum / एक डेटम के संबंध में ऊर्ध्वाधर ऊंचाई या गहराई c) Bearing from the North / उत्तर से बियरिंग d) Angle from the horizontal / क्षैतिज से कोण 21. In compass surveying, a “traverse” is a:21. कम्पास सर्वेक्षण में, एक “ट्रैवर्स” है: a) Single long line / एक अकेली लंबी रेखा b) Series of connected survey lines / जुड़ी हुई सर्वेक्षण रेखाओं की एक श्रृंखला c) A type of compass / एक प्रकार का कम्पास d) A check for accuracy / सटीकता के लिए एक जांच 22. The temporary adjustments for a dumpy level are:22. एक डम्पी लेवल के लिए अस्थायी समायोजन हैं: a) Setting up, leveling, and elimination of parallax / सेटिंग अप, लेवलिंग, और लंबन का उन्मूलन b) Centering and measuring / सेंटरिंग और मापन c) Ranging and chaining / रेंजिंग और चेनिंग d) Reading and recording / पढ़ना और रिकॉर्डिंग 23. Which instrument is used to transfer a point on the ground to the drawing sheet in plane table surveying?23. प्लेन टेबल सर्वेक्षण में जमीन पर एक बिंदु को ड्राइंग शीट पर स्थानांतरित करने के लिए किस उपकरण का उपयोग किया जाता है? a) Alidade / एलिडेड b) Trough Compass / ट्रफ कम्पास c) U-Fork with Plumb Bob / प्लम्ब बॉब के साथ यू-फोर्क d) Spirit Level / स्पिरिट लेवल 24. A well-conditioned triangle has angles that are:24. एक सु-आकार त्रिभुज में कोण होते हैं जो: a) All less than 30° / सभी 30° से कम b) Not too acute or too obtuse (between 30° and 120°) / न तो बहुत न्यून और न ही बहुत अधिक (30° और 120° के बीच) c) All greater than 120° / सभी 120° से अधिक d) All equal to 90° / सभी 90° के बराबर 25. What is the primary purpose of a tripod in surveying?25. सर्वेक्षण में एक तिपाई का प्राथमिक उद्देश्य क्या है? a) To carry the instruments / उपकरणों को ले जाने के लिए b) To provide a stable platform for mounting instruments / उपकरणों को माउंट करने के लिए एक स्थिर मंच प्रदान करना c) To measure height / ऊंचाई मापने के लिए d) To mark a station / एक स्टेशन को चिह्नित करने के लिए ← Previous Next → Finish Test / टेस्ट खत्म करें