ITI Draughtsman Mechanical 1st Year Mock Test – 6 July 17, 2025 ITI Draughtsman Mechanical 1st Year Mock Test – 6 | Instant Feedback ITI Draughtsman Mechanical 1st Year Mock Test – 6 आईटीआई ड्राफ्ट्समैन मैकेनिकल प्रथम वर्ष मॉक टेस्ट – 6 Time Left: 30:00 Test Complete! 1. What is the Representative Fraction (R.F.) for a scale of 2:1?1. 2:1 के पैमाने के लिए निरूपक भिन्न (R.F.) क्या है? a) 2 b) 1/2 c) 1 d) 20 2. The instrument used for setting out and measuring angles is a:2. कोणों को स्थापित करने और मापने के लिए उपयोग किया जाने वाला उपकरण है: a) T-Square / टी-स्क्वायर b) Protractor / प्रोट्रैक्टर c) Compass / कम्पास d) Divider / डिवाइडर 3. Which material is known for its high tensile strength and is commonly used in construction?3. कौन सी सामग्री अपनी उच्च तन्यता शक्ति के लिए जानी जाती है और आमतौर पर निर्माण में उपयोग की जाती है? a) Cast Iron / कच्चा लोहा b) Aluminum / एल्यूमीनियम c) Mild Steel / माइल्ड स्टील d) Copper / तांबा 4. In orthographic projection, the plane on which the top view is projected is the:4. ऑर्थोग्राफिक प्रोजेक्शन में, वह तल जिस पर टॉप व्यू प्रक्षेपित होता है, वह है: a) Vertical Plane (V.P.) / ऊर्ध्वाधर तल (V.P.) b) Horizontal Plane (H.P.) / क्षैतिज तल (H.P.) c) Profile Plane (P.P.) / प्रोफाइल तल (P.P.) d) Auxiliary Plane / सहायक तल 5. What is the purpose of using a file in a workshop?5. एक वर्कशॉप में एक फाइल का उपयोग करने का उद्देश्य क्या है? a) To drill holes / छेद ड्रिल करने के लिए b) To cut threads / चूड़ियाँ काटने के लिए c) To remove small amounts of material and smooth surfaces / थोड़ी मात्रा में सामग्री हटाने और सतहों को चिकना करने के लिए d) To join metal parts / धातु के हिस्सों को जोड़ने के लिए 6. The distance between the centers of two adjacent rivets in the same row is the:6. एक ही पंक्ति में दो आसन्न रिवेट्स के केंद्रों के बीच की दूरी है: a) Pitch / पिच b) Margin / मार्जिन c) Gauge / गेज d) Lap / लैप 7. In a drawing, what does “R10” mean?7. एक ड्राइंग में, “R10” का क्या अर्थ है? a) A radius of 10 units / 10 इकाइयों की एक त्रिज्या b) A diameter of 10 units / 10 इकाइयों का एक व्यास c) A repetition of 10 times / 10 बार की पुनरावृत्ति d) A resistance of 10 ohms / 10 ओम का प्रतिरोध 8. The front view of a hexagonal pyramid standing on its base will be a:8. अपने आधार पर खड़े एक षट्कोणीय पिरामिड का फ्रंट व्यू होगा: a) Hexagon / एक षट्भुज b) Triangle / एक त्रिभुज c) Rectangle / एक आयत d) Circle / एक वृत्त 9. A bolt is a fastener with a head and:9. एक बोल्ट एक सिर और के साथ एक फास्टनर है: a) Internal threads / आंतरिक चूड़ियाँ b) External threads / बाहरी चूड़ियाँ c) No threads / कोई चूड़ियाँ नहीं d) A tapered shank / एक पतला शैंक 10. The property of a material to withstand shock or impact is:10. किसी पदार्थ का वह गुण जो झटके या प्रभाव का सामना कर सकता है, वह है: a) Hardness / कठोरता b) Brittleness / भंगुरता c) Toughness / टफनेस d) Ductility / तन्यता 11. A key is used to prevent relative _______ between a shaft and a hub.11. एक की (key) का उपयोग एक शाफ्ट और एक हब के बीच सापेक्ष _______ को रोकने के लिए किया जाता है। a) Axial movement / अक्षीय गति b) Rotational movement / घूर्णी गति c) Bending / झुकना d) Vibration / कंपन 12. The CAD command to create a block from a set of objects is:12. वस्तुओं के एक सेट से एक ब्लॉक बनाने के लिए सीएडी कमांड है: a) GROUP / ग्रुप b) BLOCK / ब्लॉक c) JOIN / जॉइन d) EXPLODE / एक्सप्लोड 13. In which projection system is the plan drawn above the elevation?13. किस प्रोजेक्शन सिस्टम में प्लान को एलिवेशन के ऊपर खींचा जाता है? a) First-angle projection / फर्स्ट-एंगल प्रोजेक्शन b) Third-angle projection / थर्ड-एंगल प्रोजेक्शन c) Isometric projection / आइसोमेट्रिक प्रोजेक्शन d) Perspective projection / पर्सपेक्टिव प्रोजेक्शन 14. The material used for making machine beds is usually cast iron because of its:14. मशीन बेड बनाने के लिए उपयोग की जाने वाली सामग्री आमतौर पर कच्चा लोहा होती है, इसके कारण: a) High tensile strength / उच्च तन्यता शक्ति b) Light weight / हल्का वजन c) Good damping properties and high compressive strength / अच्छे डैम्पिंग गुण और उच्च संपीड़न शक्ति d) Ductility / तन्यता 15. The purpose of a tap is to:15. एक टैप का उद्देश्य है: a) Cut external threads / बाहरी चूड़ियाँ काटना b) Cut internal threads / आंतरिक चूड़ियाँ काटना c) Enlarge a hole / एक छेद को बड़ा करना d) Drill a hole / एक छेद ड्रिल करना 16. The symbol for third-angle projection is:16. थर्ड-एंगल प्रोजेक्शन का प्रतीक है: a) A truncated cone with the side view on the left of the front view / साइड व्यू के साथ एक छोटा शंकु जो फ्रंट व्यू के बाईं ओर है b) A truncated cone with the side view on the right of the front view / साइड व्यू के साथ एक छोटा शंकु जो फ्रंट व्यू के दाईं ओर है c) The front view and then the side view of a truncated cone / एक छोटे शंकु का फ्रंट व्यू और फिर साइड व्यू d) A simple circle / एक साधारण वृत्त 17. A fire involving flammable liquids is a:17. ज्वलनशील तरल पदार्थों से जुड़ी एक आग है: a) Class A fire / क्लास A की आग b) Class B fire / क्लास B की आग c) Class C fire / क्लास C की आग d) Class D fire / क्लास D की आग 18. The top view of a cone resting on its base on the H.P. is a:18. H.P. पर अपने आधार पर टिके हुए एक शंकु का टॉप व्यू है: a) Triangle / एक त्रिभुज b) Circle with a center point / एक केंद्र बिंदु के साथ एक वृत्त c) Rectangle / एक आयत d) Ellipse / एक दीर्घवृत्त 19. What is the main purpose of a title block in a drawing?19. एक ड्राइंग में एक टाइटल ब्लॉक का मुख्य उद्देश्य क्या है? a) To provide all identifying information for the drawing / ड्राइंग के लिए सभी पहचान जानकारी प्रदान करना b) To list the drawing tools used / उपयोग किए गए ड्राइंग उपकरणों की सूची बनाना c) To decorate the drawing sheet / ड्राइंग शीट को सजाना d) To make the drawing heavier / ड्राइंग को भारी बनाना 20. Which material is most commonly used for making nuts and bolts?20. नट और बोल्ट बनाने के लिए सबसे अधिक किस सामग्री का उपयोग किया जाता है? a) Cast Iron / कच्चा लोहा b) Mild Steel / माइल्ड स्टील c) Aluminum / एल्यूमीनियम d) Copper / तांबा 21. The CAD command to create a chamfered edge between two lines is:21. दो रेखाओं के बीच एक चैम्फर्ड किनारा बनाने के लिए CAD कमांड है: a) FILLET / फिलेट b) CHAMFER / चैम्फर c) TRIM / ट्रिम d) JOIN / जॉइन 22. Which of these is a permanent joint?22. इनमें से कौन सा एक स्थायी जोड़ है? a) Bolted joint / बोल्टेड जोड़ b) Screwed joint / स्क्रूड जोड़ c) Welded joint / वेल्डेड जोड़ d) Pinned joint / पिन किया हुआ जोड़ 23. In a sectional view, the parts that are NOT sectioned are:23. एक सेक्शनल व्यू में, वे हिस्से जो सेक्शन नहीं किए जाते हैं, वे हैं: a) The main body / मुख्य बॉडी b) Ribs and webs cut parallel to their main plane / उनकी मुख्य तल के समानांतर कटी हुई रिब्स और वेब c) Hollow portions / खोखले हिस्से d) All parts are sectioned / सभी हिस्से सेक्शन किए जाते हैं 24. What is the most important safety practice in a workshop?24. एक वर्कशॉप में सबसे महत्वपूर्ण सुरक्षा अभ्यास क्या है? a) Good housekeeping and wearing appropriate PPE / अच्छी हाउसकीपिंग और उपयुक्त पीपीई पहनना b) Working as fast as possible / जितनी जल्दी हो सके काम करना c) Using the largest hammer available / उपलब्ध सबसे बड़े हथौड़े का उपयोग करना d) Listening to music while working / काम करते समय संगीत सुनना 25. A drawing that represents an object at its actual size has a scale of:25. एक ड्राइंग जो किसी वस्तु को उसके वास्तविक आकार में दर्शाती है, उसका पैमाना होता है: a) 1:2 b) 2:1 c) 1:1 d) 1:100 ← Previous Next → Finish Test / टेस्ट खत्म करें