ITI Draughtsman Mechanical 1st Year Mock Test – 3 July 17, 2025 ITI Draughtsman Mechanical 1st Year Mock Test – 3 | Instant Feedback ITI Draughtsman Mechanical 1st Year Mock Test – 3 आईटीआई ड्राफ्ट्समैन मैकेनिकल प्रथम वर्ष मॉक टेस्ट – 3 Time Left: 30:00 Test Complete! 1. In orthographic projection, the view of an object from the front is called:1. ऑर्थोग्राफिक प्रोजेक्शन में, किसी वस्तु का सामने से दृश्य कहलाता है: a) Plan or Top View / प्लान या टॉप व्यू b) Elevation or Front View / एलिवेशन या फ्रंट व्यू c) Side View / साइड व्यू d) Sectional View / सेक्शनल व्यू 2. The best way to draw a 75° angle without a protractor is by using:2. बिना प्रोट्रैक्टर के 75° का कोण बनाने का सबसे अच्छा तरीका है: a) Only a 45° set square / केवल एक 45° सेट स्क्वायर का उपयोग करना b) Only a 30°-60° set square / केवल एक 30°-60° सेट स्क्वायर का उपयोग करना c) A combination of 45° and 30°-60° set squares / 45° और 30°-60° सेट स्क्वायर के संयोजन का उपयोग करना d) A compass / एक कम्पास का उपयोग करना 3. A regular pentagon has _______ equal sides.3. एक नियमित पंचभुज में _______ समान भुजाएँ होती हैं। a) Four / चार b) Five / पाँच c) Six / छह d) Eight / आठ 4. For a minor burn in the workshop, the immediate first aid is to:4. वर्कशॉप में मामूली जलने पर, तत्काल प्राथमिक उपचार है: a) Apply grease or oil / ग्रीस या तेल लगाना b) Hold the affected area under cool running water / प्रभावित क्षेत्र को ठंडे बहते पानी के नीचे रखना c) Cover it immediately with a bandage / इसे तुरंत एक पट्टी से ढकना d) Apply ice directly / सीधे बर्फ लगाना 5. The purpose of a sectional view in a drawing is to show:5. एक ड्राइंग में एक सेक्शनल व्यू का उद्देश्य दिखाना है: a) The object from the top / वस्तु को ऊपर से b) The object from the side / वस्तु को बगल से c) The internal details of an object / एक वस्तु का आंतरिक विवरण d) A 3D view of the object / वस्तु का 3D व्यू 6. The standard included angle of a metric V-thread is:6. एक मीट्रिक वी-थ्रेड का मानक आंतरिक कोण है: a) 55° b) 60° c) 45° d) 90° 7. The property of a material to break without significant plastic deformation is:7. किसी पदार्थ का वह गुण जिसके कारण वह बिना किसी महत्वपूर्ण प्लास्टिक विरूपण के टूट जाता है, वह है: a) Ductility / तन्यता b) Malleability / आघातवर्धनीयता c) Brittleness / भंगुरता d) Toughness / टफनेस 8. The dimensioning system where all dimension texts are written horizontally is:8. वह विमांकन प्रणाली जिसमें सभी विमा टेक्स्ट क्षैतिज रूप से लिखे जाते हैं, वह है: a) Aligned system / अलाइन्ड सिस्टम b) Unidirectional system / यूनिडायरेक्शनल सिस्टम c) Parallel system / पैरेलल सिस्टम d) Chain system / चेन सिस्टम 9. The projection of a sphere onto any plane will always be a:9. किसी भी तल पर एक गोले का प्रक्षेपण हमेशा होगा: a) Sphere / एक गोला b) Ellipse / एक दीर्घवृत्त c) Circle / एक वृत्त d) Point / एक बिंदु 10. The main purpose of a washer in a bolted joint is to:10. एक बोल्टेड जोड़ में एक वॉशर का मुख्य उद्देश्य है: a) Look good / अच्छा दिखना b) Increase the length of the bolt / बोल्ट की लंबाई बढ़ाना c) Distribute the load over a larger area / भार को एक बड़े क्षेत्र में वितरित करना d) Lock the nut / नट को लॉक करना 11. In CAD, the command to create a copy of an object rotated around a base point is:11. सीएडी में, एक बेस पॉइंट के चारों ओर घुमाई गई किसी वस्तु की प्रतिलिपि बनाने के लिए कमांड है: a) MOVE / मूव b) COPY / कॉपी c) ROTATE / रोटेट d) MIRROR / मिरर 12. Section lines (hatching lines) are generally drawn at an angle of:12. सेक्शन लाइनें (हैचिंग लाइनें) आम तौर पर किस कोण पर खींची जाती हैं: a) 30° b) 45° c) 60° d) 90° 13. The top view of a cone standing on its base will be a:13. अपने आधार पर खड़े एक शंकु का टॉप व्यू होगा: a) Triangle / एक त्रिभुज b) Circle / एक वृत्त c) Rectangle / एक आयत d) Square / एक वर्ग 14. The distance a screw thread advances axially in one turn is its:14. वह दूरी जो एक स्क्रू थ्रेड एक चक्कर में अक्षीय रूप से आगे बढ़ती है, वह है: a) Pitch / पिच b) Lead / लीड c) Crest / क्रेस्ट d) Root / रूट 15. Why is good ventilation important in a workshop?15. एक वर्कशॉप में अच्छा वेंटिलेशन क्यों महत्वपूर्ण है? a) To make the room warmer / कमरे को गर्म बनाने के लिए b) To reduce noise / शोर कम करने के लिए c) To remove harmful fumes, dust, and provide fresh air / हानिकारक धुएं, धूल को हटाने और ताजी हवा प्रदान करने के लिए d) To provide good lighting / अच्छी रोशनी प्रदान करने के लिए 16. Cast iron is known for its excellent:16. कच्चा लोहा किसके लिए जाना जाता है: a) Ductility / तन्यता b) Compressive strength and castability / संपीड़न शक्ति और कास्टेबिलिटी c) Tensile strength / तन्यता शक्ति d) Malleability / आघातवर्धनीयता 17. A sectional view that shows one-quarter of the object removed is a:17. एक सेक्शनल व्यू जो वस्तु का एक-चौथाई हिस्सा हटा हुआ दिखाता है, वह है: a) Full section / फुल सेक्शन b) Half section / हाफ सेक्शन c) Offset section / ऑफसेट सेक्शन d) Removed section / रिमूव्ड सेक्शन 18. The CAD command used to change the position of an object is:18. किसी वस्तु की स्थिति बदलने के लिए उपयोग की जाने वाली CAD कमांड है: a) COPY / कॉपी b) ROTATE / रोटेट c) SCALE / स्केल d) MOVE / मूव 19. In first-angle projection, the side view from the left is drawn on the:19. फर्स्ट-एंगल प्रोजेक्शन में, बाईं ओर से साइड व्यू खींचा जाता है: a) Left side of the front view / फ्रंट व्यू के बाईं ओर b) Right side of the front view / फ्रंट व्यू के दाईं ओर c) Top of the front view / फ्रंट व्यू के ऊपर d) Bottom of the front view / फ्रंट व्यू के नीचे 20. What is the common name for a hexagonal nut?20. एक षट्कोणीय नट का सामान्य नाम क्या है? a) Square nut / स्क्वायर नट b) Wing nut / विंग नट c) Hex nut / हेक्स नट d) Cap nut / कैप नट 21. A scale of 1:1 represents a:21. 1:1 का पैमाना दर्शाता है: a) Reducing scale / छोटा करने वाला पैमाना b) Enlarging scale / बड़ा करने वाला पैमाना c) Full-size scale / पूर्ण आकार का पैमाना d) Vernier scale / वर्नियर पैमाना 22. Aluminum is a metal which is known for being:22. एल्यूमीनियम एक धातु है जो किसके लिए जानी जाती है: a) Heavy and strong / भारी और मजबूत b) Lightweight and corrosion-resistant / हल्का और संक्षारण-प्रतिरोधी c) Magnetic / चुंबकीय d) Brittle / भंगुर 23. Section lines should NOT be drawn parallel or perpendicular to:23. सेक्शन रेखाएं किसके समानांतर या लंबवत नहीं खींची जानी चाहिए: a) The border of the drawing sheet / ड्राइंग शीट की सीमा b) The main axis or outlines of the section / मुख्य धुरी या सेक्शन की रूपरेखा c) Each other / एक दूसरे के d) The dimension lines / विमा रेखाओं के 24. Before using any workshop machine, you must:24. किसी भी वर्कशॉप मशीन का उपयोग करने से पहले, आपको चाहिए: a) Clean it thoroughly / इसे अच्छी तरह से साफ करें b) Know its operation and safety procedures / इसके संचालन और सुरक्षा प्रक्रियाओं को जानें c) Check its price / इसकी कीमत जांचें d) Oil all its parts / इसके सभी भागों में तेल डालें 25. A polygon with six equal sides is a:25. छह समान भुजाओं वाला एक बहुभुज है: a) Pentagon / पंचभुज b) Hexagon / षट्भुज c) Heptagon / सप्तभुज d) Octagon / अष्टभुज ← Previous Next → Finish Test / टेस्ट खत्म करें