ITI Draughtsman Civil 2nd Year Mock Test – 3 July 17, 2025 ITI Draughtsman Civil 2nd Year Mock Test – 3 | Instant Feedback ITI Draughtsman Civil 2nd Year Mock Test – 3 आईटीआई ड्राफ्ट्समैन सिविल द्वितीय वर्ष मॉक टेस्ट – 3 Time Left: 30:00 Test Complete! 1. In RCC beam design, the ‘cover’ to reinforcement is provided to:1. RCC बीम डिजाइन में, सुदृढीकरण के लिए ‘कवर’ प्रदान किया जाता है: a) Increase the weight of the beam / बीम का वजन बढ़ाने के लिए b) Protect the steel from corrosion and fire / स्टील को जंग और आग से बचाने के लिए c) Hold the stirrups in place / स्टिरप्स को जगह पर रखने के लिए d) Reduce the cost of the beam / बीम की लागत कम करने के लिए 2. The CAD command to create a bevelled edge between two lines is:2. दो रेखाओं के बीच एक बेवेल्ड किनारा बनाने के लिए CAD कमांड है: a) FILLET / फिलेट b) TRIM / ट्रिम c) CHAMFER / चैम्फर d) OFFSET / ऑफसेट 3. The main function of a gully trap is to:3. एक गली ट्रैप का मुख्य कार्य है: a) Collect rainwater from the roof / छत से वर्षा जल एकत्र करना b) Prevent foul gases from the main sewer from entering the house drains / मुख्य सीवर से आने वाली दुर्गंधयुक्त गैसों को घर की नालियों में प्रवेश करने से रोकना c) Filter the wastewater / अपशिष्ट जल को फ़िल्टर करना d) Increase the flow of water / पानी का प्रवाह बढ़ाना 4. The part of a bridge that supports the deck and girders is the:4. एक पुल का वह हिस्सा जो डेक और गर्डरों को सहारा देता है, वह है: a) Foundation / नींव b) Superstructure / सुपरस्ट्रक्चर c) Substructure (Piers and Abutments) / सबस्ट्रक्चर (पियर्स और एबटमेंट्स) d) Wearing course / वियरिंग कोर्स 5. The unit of measurement for brickwork is generally:5. ईंटवर्क के लिए माप की इकाई आम तौर पर होती है: a) Cubic meter (cum) / घन मीटर (cum) b) Square meter (sqm) / वर्ग मीटर (sqm) c) Running meter (m) / रनिंग मीटर (m) d) Kilogram (kg) / किलोग्राम (kg) 6. A vertical member in a steel truss that is under tension is called a:6. एक स्टील ट्रस में एक ऊर्ध्वाधर सदस्य जो तनाव में है, कहलाता है: a) Strut / स्ट्रट b) Tie / टाई c) Rafter / राफ्टर d) Purlin / पर्लिन 7. The Centre Line method of estimating is quicker for:7. अनुमान लगाने की सेंटर लाइन विधि किसके लिए तेज है: a) Buildings with simple and symmetrical plans / सरल और सममित योजनाओं वाली इमारतों के लिए b) Irregularly shaped buildings / अनियमित आकार की इमारतों के लिए c) Circular buildings / वृत्ताकार इमारतों के लिए d) Buildings with many partitions / कई विभाजनों वाली इमारतों के लिए 8. The bank of a canal on which an inspection road is provided is the:8. एक नहर का वह किनारा जिस पर एक निरीक्षण सड़क प्रदान की जाती है, वह है: a) Dowel bank / डॉवेल बैंक b) Spoil bank / स्पॉइल बैंक c) Service road or Dowel / सर्विस रोड या डॉवेल d) Berm / बर्म 9. The main reinforcement in a simply supported slab is placed:9. एक साधारण समर्थित स्लैब में मुख्य सुदृढीकरण रखा जाता है: a) At the top of the slab / स्लैब के शीर्ष पर b) At the bottom of the slab / स्लैब के तल पर c) In the middle of the slab / स्लैब के बीच में d) On the sides of the slab / स्लैब के किनारों पर 10. The AutoCAD command to create a filled 2D solid is:10. एक भरा हुआ 2D ठोस बनाने के लिए ऑटोकैड कमांड है: a) HATCH / हैच b) SOLID or FILL / सॉलिड या फिल c) AREA / एरिया d) BOUNDARY / बाउंड्री 11. A pipe that carries human excreta is called a:11. मानव मल ले जाने वाला एक पाइप कहलाता है: a) Waste pipe / वेस्ट पाइप b) Soil pipe / सॉइल पाइप c) Vent pipe / वेंट पाइप d) Anti-siphonage pipe / एंटी-साइफनेज पाइप 12. The uppermost part of a bridge structure is the:12. एक पुल संरचना का सबसे ऊपरी हिस्सा है: a) Foundation / नींव b) Pier / पियर c) Decking or Roadway / डेकिंग या रोडवे d) Abutment / एबटमेंट 13. Painting is measured in:13. पेंटिंग को मापा जाता है: a) Cubic meters (cum) / घन मीटर (cum) b) Kilograms (kg) / किलोग्राम (kg) c) Square meters (sqm) / वर्ग मीटर (sqm) d) Liters / लीटर 14. The process of joining steel members using bolts is called:14. बोल्ट का उपयोग करके स्टील के सदस्यों को जोड़ने की प्रक्रिया कहलाती है: a) Welding / वेल्डिंग b) Riveting / रिवेटिंग c) Bolting / बोल्टिंग d) Soldering / सोल्डरिंग 15. A structure that carries a canal over a river is a:15. एक संरचना जो एक नदी के ऊपर एक नहर ले जाती है, वह है: a) Super passage / सुपर पैसेज b) Aqueduct / एक्वाडक्ट c) Level crossing / लेवल क्रॉसिंग d) Syphon / साइफन 16. The top layer of a road which is in direct contact with traffic is the:16. एक सड़क की ऊपरी परत जो यातायात के सीधे संपर्क में है, वह है: a) Subgrade / सबग्रेड b) Base course / बेस कोर्स c) Sub-base course / सब-बेस कोर्स d) Wearing course / वियरिंग कोर्स 17. A beam which is fixed at one end and free at the other is a:17. एक बीम जो एक सिरे पर स्थिर है और दूसरे पर मुक्त है, वह है: a) Simply supported beam / साधारण समर्थित बीम b) Cantilever beam / कैंटिलीवर बीम c) Continuous beam / सतत बीम d) Fixed beam / फिक्स्ड बीम 18. The CAD command to change the properties of an existing object is:18. एक मौजूदा वस्तु के गुणों को बदलने के लिए सीएडी कमांड है: a) MODIFY / मॉडिफाई b) PROPERTIES / प्रॉपर्टीज c) CHANGE / चेंज d) EDIT / एडिट 19. In a steel truss, a member under compression is a:19. एक स्टील ट्रस में, संपीड़न में एक सदस्य है: a) Tie / टाई b) Strut / स्ट्रट c) Beam / बीम d) Gusset / गसेट 20. Which of these is a water supply fitting?20. इनमें से कौन एक जल आपूर्ति फिटिंग है? a) Gully trap / गली ट्रैप b) Ferrule / फेरूल c) Manhole / मैनहोल d) Vent pipe / वेंट पाइप 21. The main purpose of a building bye-law is to:21. एक भवन उप-नियम का मुख्य उद्देश्य है: a) Increase the cost of construction / निर्माण की लागत बढ़ाना b) Ensure orderly and safe development of buildings / भवनों का व्यवस्थित और सुरक्षित विकास सुनिश्चित करना c) Limit the number of floors / मंजिलों की संख्या को सीमित करना d) Collect taxes / कर एकत्र करना 22. The vertical members that support a handrail in a staircase are:22. एक सीढ़ी में एक हैंडरेल को सहारा देने वाले ऊर्ध्वाधर सदस्य हैं: a) Treads / ट्रेड्स b) Risers / राइजर्स c) Balusters / बलस्टर्स d) Stringers / स्ट्रिंगर्स 23. In a drawing, what does a section view show?23. एक ड्राइंग में, एक सेक्शन व्यू क्या दिखाता है? a) The outside of the building / इमारत के बाहर का दृश्य b) The interior of the building as if cut by a plane / इमारत का इंटीरियर जैसे कि एक तल से काटा गया हो c) The top view of the building / इमारत का टॉप व्यू d) The 3D view of the building / इमारत का 3D व्यू 24. What is a key safety measure when working on scaffolding?24. स्कैफोल्डिंग पर काम करते समय एक प्रमुख सुरक्षा उपाय क्या है? a) Not using any safety harness / किसी भी सुरक्षा हार्नेस का उपयोग नहीं करना b) Ensuring the scaffold is stable and using guardrails / यह सुनिश्चित करना कि मचान स्थिर है और गार्डरेल का उपयोग करना c) Throwing tools down to colleagues / सहकर्मियों को उपकरण नीचे फेंकना d) Overloading the platform / प्लेटफॉर्म को ओवरलोड करना 25. The wearing course of a road is also called the:25. एक सड़क की वियरिंग कोर्स को यह भी कहा जाता है: a) Subgrade / सबग्रेड b) Base course / बेस कोर्स c) Surface course / सरफेस कोर्स d) Sub-base / सब-बेस ← Previous Next → Finish Test / टेस्ट खत्म करें