ITI Draughtsman Civil 2nd Year Mock Test – 1 July 17, 2025 ITI Draughtsman Civil 2nd Year Mock Test – 1 | Instant Feedback ITI Draughtsman Civil 2nd Year Mock Test – 1 आईटीआई ड्राफ्ट्समैन सिविल द्वितीय वर्ष मॉक टेस्ट – 1 Time Left: 30:00 Test Complete! 1. In an RCC beam, where is the main tensile reinforcement placed?1. एक आरसीसी बीम में, मुख्य तन्यता सुदृढीकरण कहाँ रखा जाता है? a) At the top of the beam / बीम के शीर्ष पर b) In the middle of the beam / बीम के बीच में c) At the bottom of the beam / बीम के तल पर d) On the sides of the beam / बीम के किनारों पर 2. The command in AutoCAD to create a parallel copy of an object is:2. ऑटोकैड में किसी वस्तु की समानांतर प्रतिलिपि बनाने के लिए कमांड है: a) COPY / कॉपी b) MOVE / मूव c) OFFSET / ऑफसेट d) MIRROR / मिरर 3. The trap which is provided to disconnect the house drain from the public sewer is called:3. घर की नाली को सार्वजनिक सीवर से अलग करने के लिए प्रदान किया जाने वाला ट्रैप कहलाता है: a) P-trap / पी-ट्रैप b) Gully trap / गली ट्रैप c) Intercepting trap / इंटरसेप्टिंग ट्रैप d) Bottle trap / बोतल ट्रैप 4. A bridge constructed over a dry valley or a ravine is called a:4. एक सूखी घाटी या खड्ड पर बनाया गया पुल कहलाता है: a) Culvert / पुलिया b) Viaduct / वायाडक्ट c) Aqueduct / एक्वाडक्ट d) Causeway / कॉजवे 5. What does CAD stand for?5. सीएडी (CAD) का क्या अर्थ है? a) Computer Aided Drawing / कंप्यूटर एडेड ड्राइंग b) Computer Aided Design / कंप्यूटर एडेड डिजाइन c) Civil Architecture Design / सिविल आर्किटेक्चर डिजाइन d) Computer and Drawing / कंप्यूटर और ड्राइंग 6. The vertical posts in a steel roof truss that are under compression are called:6. एक स्टील की छत के ट्रस में ऊर्ध्वाधर पोस्ट जो संपीड़न में होते हैं, कहलाते हैं: a) Struts / स्ट्रट्स b) Ties / टाइज c) Rafters / राफ्टर्स d) Purlins / पर्लिन 7. The process of calculating the quantities of materials for a construction project is:7. एक निर्माण परियोजना के लिए सामग्री की मात्रा की गणना करने की प्रक्रिया है: a) Designing / डिजाइनिंग b) Surveying / सर्वेक्षण c) Estimating / अनुमान लगाना d) Drawing / ड्राइंग 8. The bottom-most part of a canal section is the:8. एक नहर खंड का सबसे निचला हिस्सा है: a) Berm / बर्म b) Bank / बैंक c) Bed / बेड d) Side slope / साइड स्लोप 9. In RCC, the steel reinforcement is provided to resist:9. आरसीसी में, स्टील सुदृढीकरण का विरोध करने के लिए प्रदान किया जाता है: a) Compressive forces / संपीड़न बल b) Tensile forces / तन्यता बल c) Shear forces only / केवल कतरनी बल d) Torsional forces / मरोड़ बल 10. The AutoCAD command to round the corners of two intersecting lines is:10. दो प्रतिच्छेदी रेखाओं के कोनों को गोल करने के लिए ऑटोकैड कमांड है: a) CHAMFER / चैम्फर b) TRIM / ट्रिम c) FILLET / फिलेट d) EXTEND / एक्सटेंड 11. A manhole in a sewer line is provided to:11. एक सीवर लाइन में एक मैनहोल प्रदान किया जाता है: a) Allow inspection, cleaning, and maintenance / निरीक्षण, सफाई और रखरखाव की अनुमति देना b) Increase the flow of sewage / सीवेज के प्रवाह को बढ़ाना c) Store sewage / सीवेज का भंडारण करना d) Reduce the smell / गंध को कम करना 12. The highest point of an arch is called the:12. एक मेहराब का उच्चतम बिंदु कहलाता है: a) Springing point / स्प्रिंगिंग प्वाइंट b) Crown / क्राउन c) Abutment / एबटमेंट d) Soffit / सॉफिट 13. In a road cross-section, the slope provided for drainage is called:13. एक सड़क क्रॉस-सेक्शन में, जल निकासी के लिए प्रदान की गई ढलान कहलाती है: a) Gradient / ग्रेडिएंट b) Superelevation / सुपरएलिवेशन c) Camber or Crossfall / कैम्बर या क्रॉसफॉल d) Shoulder / शोल्डर 14. Which of these is a water-bound structure?14. इनमें से कौन एक जल-बाध्य संरचना है? a) A building / एक इमारत b) A road / एक सड़क c) A bridge / एक पुल d) A dam / एक बांध 15. The “dog-legged” staircase is one which:15. “डॉग-लेग्ड” सीढ़ी वह है जो: a) Is circular in plan / योजना में वृत्ताकार है b) Has two flights that run in opposite directions / में दो फ्लाइट्स होती हैं जो विपरीत दिशाओं में चलती हैं c) Has no landing / में कोई लैंडिंग नहीं है d) Is made of wood / लकड़ी की बनी है 16. The CAD command to create a rounded corner between two lines is:16. दो रेखाओं के बीच एक गोल कोना बनाने के लिए सीएडी कमांड है: a) FILLET / फिलेट b) CHAMFER / चैम्फर c) TRIM / ट्रिम d) EXTEND / एक्सटेंड 17. In a steel roof truss, the diagonal members under tension are called:17. एक स्टील की छत के ट्रस में, तनाव में रहने वाले विकर्ण सदस्य कहलाते हैं: a) Struts / स्ट्रट्स b) Ties / टाइज c) Purlins / पर्लिन d) Rafters / राफ्टर्स 18. The unit for estimating concrete work is typically:18. कंक्रीट के काम का अनुमान लगाने के लिए इकाई आमतौर पर होती है: a) Square meter / वर्ग मीटर b) Cubic meter / घन मीटर c) Kilogram / किलोग्राम d) Meter / मीटर 19. A small bridge with a span of less than 6 meters is a:19. 6 मीटर से कम की अवधि वाला एक छोटा पुल है: a) Viaduct / वायाडक्ट b) Aqueduct / एक्वाडक्ट c) Culvert / पुलिया d) Causeway / कॉजवे 20. The CAD command to join two separate lines into a single polyline is:20. दो अलग-अलग रेखाओं को एक ही पॉलीलाइन में जोड़ने के लिए सीएडी कमांड है: a) JOIN / जॉइन b) MERGE / मर्ज c) COMBINE / कंबाइन d) GROUP / ग्रुप 21. The main load-bearing components in a building’s structure are:21. एक इमारत की संरचना में मुख्य भार-वहन घटक हैं: a) Doors and windows / दरवाजे और खिड़कियां b) Plaster and paint / प्लास्टर और पेंट c) Foundations, columns, and beams / नींव, स्तंभ, और बीम d) Flooring tiles / फर्श की टाइलें 22. Which material is primarily used to provide tensile strength to concrete?22. कंक्रीट को तन्यता शक्ति प्रदान करने के लिए मुख्य रूप से किस सामग्री का उपयोग किया जाता है? a) Sand / रेत b) Gravel / बजरी c) Steel reinforcement bars / स्टील सुदृढीकरण बार d) Water / पानी 23. A “dog-legged” stair has:23. एक “डॉग-लेग्ड” सीढ़ी में होता है: a) A circular shape / एक वृत्ताकार आकार b) Two flights parallel to each other with a landing in between / एक दूसरे के समानांतर दो फ्लाइट्स जिनके बीच में एक लैंडिंग होती है c) No landing / कोई लैंडिंग नहीं d) Three flights / तीन फ्लाइट्स 24. What is the main purpose of a septic tank?24. एक सेप्टिक टैंक का मुख्य उद्देश्य क्या है? a) To store fresh water / ताजे पानी का भंडारण करना b) To treat domestic sewage on a small scale / छोटे पैमाने पर घरेलू सीवेज का उपचार करना c) To filter rainwater / बारिश के पानी को फ़िल्टर करना d) To provide water for gardening / बागवानी के लिए पानी प्रदान करना 25. The command to create a rectangle in AutoCAD is:25. ऑटोकैड में एक आयत बनाने के लिए कमांड है: a) PLINE / पीलाइन b) SQUARE / स्क्वायर c) RECTANGLE / रेक्टेंगल d) BOX / बॉक्स ← Previous Next → Finish Test / टेस्ट खत्म करें