ITI Turner 1st Year Mock Test – 10 July 16, 2025 ITI Turner 1st Year Mock Test – 10 | Instant Feedback ITI Turner 1st Year Mock Test – 10 आईटीआई टर्नर प्रथम वर्ष मॉक टेस्ट – 10 Time Left: 30:00 Test Complete! 1. In case of an accident in the workshop, the first action should be to:1. वर्कशॉप में दुर्घटना होने पर सबसे पहली कार्रवाई क्या होनी चाहिए? a) Continue working / काम जारी रखें b) Shout for help / मदद के लिए चिल्लाएं c) Ensure the scene is safe, then attend to the injured and inform a supervisor / सुनिश्चित करें कि घटनास्थल सुरक्षित है, फिर घायल व्यक्ति की देखभाल करें और पर्यवेक्षक को सूचित करें d) Try to fix the machine that caused the accident / दुर्घटना का कारण बनी मशीन को ठीक करने का प्रयास करें 2. The lathe operation to make a workpiece surface very smooth using an abrasive cloth is called:2. एक अपघर्षक कपड़े का उपयोग करके वर्कपीस की सतह को बहुत चिकना बनाने की लेथ प्रक्रिया कहलाती है: a) Filing / फाइलिंग b) Polishing / पॉलिशिंग c) Grinding / ग्राइंडिंग d) Knurling / नर्लिंग 3. The part of a micrometer on which the main scale is marked is the:3. एक माइक्रोमीटर का वह हिस्सा जिस पर मुख्य पैमाना अंकित होता है, वह है: a) Thimble / थिम्बल b) Anvil / एनविल c) Barrel or Sleeve / बैरल या स्लीव d) Ratchet stop / रैचेट स्टॉप 4. A “second cut” file is:4. एक “सेकंड कट” फाइल है: a) Very rough / बहुत खुरदरी b) Very smooth / बहुत चिकनी c) Medium in coarseness, between bastard and smooth / खुरदरेपन में मध्यम, बास्टर्ड और स्मूथ के बीच d) A file with two cutting edges / दो कटिंग किनारों वाली एक फाइल 5. If the feed rate on a lathe is increased, the surface finish will generally:5. यदि लेथ पर फ़ीड दर बढ़ा दी जाती है, तो सतह फिनिश आम तौर पर: a) Improve (become smoother) / सुधरेगी (अधिक चिकनी हो जाएगी) b) Worsen (become rougher) / खराब होगी (अधिक खुरदरी हो जाएगी) c) Remain the same / वही रहेगी d) Become shiny / चमकदार हो जाएगी 6. The property of a material to resist scratching and indentation is called:6. किसी पदार्थ का खरोंच और इंडेंटेशन का विरोध करने का गुण कहलाता है: a) Toughness / टफनेस b) Hardness / कठोरता c) Ductility / तन्यता d) Malleability / आघातवर्धनीयता 7. A tool bit for machining aluminum should generally have a:7. एल्यूमीनियम की मशीनिंग के लिए एक टूल बिट में आम तौर पर होना चाहिए: a) Large positive rake angle / एक बड़ा पॉजिटिव रेक एंगल b) A negative rake angle / एक नेगेटिव रेक एंगल c) Zero rake angle / शून्य रेक एंगल d) A very small clearance angle / एक बहुत छोटा क्लीयरेंस एंगल 8. The angle between the flanks of a metric thread is:8. एक मीट्रिक थ्रेड के फ्लैंक्स के बीच का कोण है: a) 55 degrees / 55 डिग्री b) 60 degrees / 60 डिग्री c) 45 degrees / 45 डिग्री d) 29 degrees / 29 डिग्री 9. What is the least count of a standard metric outside micrometer?9. एक मानक मीट्रिक आउटसाइड माइक्रोमीटर का अल्पतमांक क्या है? a) 0.10 mm b) 0.02 mm c) 0.01 mm d) 0.50 mm 10. The spiral grooves along the length of a drill bit are called:10. एक ड्रिल बिट की लंबाई के साथ सर्पिल खांचे कहलाते हैं: a) Lands / लैंड्स b) Flutes / फ्लूट्स c) Shanks / शैंक्स d) Webs / वेब्स 11. What is the main purpose of the tailstock on a lathe?11. लेथ पर टेलस्टॉक का मुख्य उद्देश्य क्या है? a) To hold the chuck / चक को पकड़ना b) To change the spindle speed / स्पिंडल की गति बदलना c) To support the free end of a long job and to hold tools like drills and reamers / एक लंबे जॉब के मुक्त सिरे को सहारा देना और ड्रिल और रीमर जैसे उपकरणों को पकड़ना d) To hold the cutting tool for turning / टर्निंग के लिए कटिंग टूल को पकड़ना 12. A die stock is a tool used to:12. एक डाई स्टॉक एक उपकरण है जिसका उपयोग किया जाता है: a) Hold a tap for internal threading / आंतरिक थ्रेडिंग के लिए एक टैप को पकड़ने के लिए b) Hold and turn a die for cutting external threads / बाहरी चूड़ियाँ काटने के लिए एक डाई को पकड़ने और घुमाने के लिए c) Hold a workpiece in the lathe / लेथ में एक वर्कपीस को पकड़ने के लिए d) Hold a file for finishing / फिनिशिंग के लिए एक फाइल को पकड़ने के लिए 13. The part of the lathe that moves on the saddle towards or away from the operator is the:13. लेथ का वह हिस्सा जो सैडल पर ऑपरेटर की ओर या उससे दूर जाता है, वह है: a) Compound slide / कंपाउंड स्लाइड b) Top slide / टॉप स्लाइड c) Cross-slide / क्रॉस-स्लाइड d) Apron / एप्रन 14. What does the “grade” of a grinding wheel refer to?14. एक ग्राइंडिंग व्हील का “ग्रेड” क्या संदर्भित करता है? a) The size of the abrasive particles / अपघर्षक कणों का आकार b) The type of abrasive used / उपयोग किए गए अपघर्षक का प्रकार c) The strength of the bond holding the abrasives (hardness) / अपघर्षक को पकड़ने वाले बांड की मजबूती (कठोरता) d) The shape of the wheel / व्हील का आकार 15. The main purpose of a chuck guard is to:15. एक चक गार्ड का मुख्य उद्देश्य है: a) Help center the workpiece / वर्कपीस को केंद्रित करने में मदद करना b) Protect the operator from flying chips and coolant / ऑपरेटर को उड़ते चिप्स और कूलेंट से बचाना c) Keep the chuck clean / चक को साफ रखना d) Increase the grip of the chuck / चक की पकड़ बढ़ाना 16. The property of a material to be hammered into thin sheets is called:16. किसी पदार्थ को पतली चादरों में पीटे जाने का गुण कहलाता है: a) Ductility / तन्यता b) Malleability / आघातवर्धनीयता c) Hardness / कठोरता d) Toughness / टफनेस 17. A positive rake angle on a cutting tool is generally used for:17. एक कटिंग टूल पर एक पॉजिटिव रेक एंगल का उपयोग आम तौर पर किया जाता है: a) Machining hard and brittle materials / कठोर और भंगुर सामग्री की मशीनिंग के लिए b) Machining soft and ductile materials / नरम और तन्य सामग्री की मशीनिंग के लिए c) Heavy interrupted cuts / भारी बाधित कट के लिए d) Creating a rough surface finish / एक खुरदरी सतह फिनिश बनाने के लिए 18. The part of a lathe that holds the tailstock and carriage is the:18. लेथ का वह हिस्सा जो टेलस्टॉक और कैरिज को पकड़ता है, वह है: a) Headstock / हेडस्टॉक b) Spindle / स्पिंडल c) Bed / बेड d) Tool post / टूल पोस्ट 19. A center punch is used before drilling to:19. ड्रिलिंग से पहले एक सेंटर पंच का उपयोग किया जाता है: a) Check the hardness of the material / सामग्री की कठोरता की जांच करने के लिए b) Create an indentation to accurately guide the drill / ड्रिल को सटीक रूप से मार्गदर्शन करने के लिए एक इंडेंटेशन बनाने के लिए c) Clean the surface of the workpiece / वर्कपीस की सतह को साफ करने के लिए d) Measure the diameter of the hole / छेद का व्यास मापने के लिए 20. The operation of producing a cylindrical surface on a workpiece is called:20. एक वर्कपीस पर एक बेलनाकार सतह बनाने की प्रक्रिया कहलाती है: a) Facing / फेसिंग b) Knurling / नर्लिंग c) Plain turning / प्लेन टर्निंग d) Threading / थ्रेडिंग 21. Before leaving the workshop, you should always:21. वर्कशॉप छोड़ने से पहले, आपको हमेशा चाहिए: a) Leave the machines running / मशीनों को चालू छोड़ दें b) Clean your work area and return tools to their proper place / अपने कार्य क्षेत्र को साफ करें और औजारों को उनकी उचित जगह पर वापस रखें c) Leave chips and oil on the floor / फर्श पर चिप्स और तेल छोड़ दें d) Leave the lights on / लाइटें चालू छोड़ दें 22. The feed of a lathe is expressed in:22. एक लेथ की फ़ीड को व्यक्त किया जाता है: a) Meters per minute (m/min) / मीटर प्रति मिनट (m/min) b) Revolutions per minute (RPM) / चक्कर प्रति मिनट (RPM) c) Millimeters per revolution (mm/rev) / मिलीमीटर प्रति चक्कर (mm/rev) d) Degrees per minute / डिग्री प्रति मिनट 23. Which accessory is essential for eccentric turning?23. एक्सेंट्रिक टर्निंग के लिए कौन सी एक्सेसरी आवश्यक है? a) Three-jaw chuck / थ्री-जॉ चक b) Steady rest / स्टेडी रेस्ट c) Four-jaw independent chuck / फोर-जॉ इंडिपेंडेंट चक d) Collet chuck / कोलेट चक 24. Tempering makes a hardened tool:24. टेम्परिंग एक कठोर टूल को बनाता है: a) Softer but tougher / नरम लेकिन टफ b) Harder and more brittle / कठोर और अधिक भंगुर c) Only shinier / केवल चमकदार d) Resistant to rust / जंग के प्रतिरोधी 25. What is the main purpose of the carriage stop on a lathe?25. लेथ पर कैरिज स्टॉप का मुख्य उद्देश्य क्या है? a) To stop the spindle rotation / स्पिंडल के घूर्णन को रोकने के लिए b) To limit the travel of the carriage for turning to a shoulder / एक शोल्डर तक टर्निंग के लिए कैरिज की यात्रा को सीमित करने के लिए c) To hold the tailstock in place / टेलस्टॉक को जगह पर रखने के लिए d) To engage the half-nut / हाफ-नट को संलग्न करने के लिए ← Previous Next → Finish Test / टेस्ट खत्म करें