ITI Painter 1st Year Mock Test – 9 July 19, 2025 ITI Painter 1st Year Mock Test – 9 | Instant Feedback ITI Painter 1st Year Mock Test – 9 आईटीआई पेंटर प्रथम वर्ष मॉक टेस्ट – 9 Time Left: 30:00 Test Complete! 1. The liquid component in paint that evaporates as it dries is the:1. पेंट में वह तरल घटक जो सूखने पर वाष्पित हो जाता है, वह है: a) Pigment / पिगमेंट b) Binder / बाइंडर c) Solvent / सॉल्वेंट d) Additive / एडिटिव 2. The process of applying a thin, transparent protective layer on wood is called:2. लकड़ी पर एक पतली, पारदर्शी सुरक्षात्मक परत लगाने की प्रक्रिया कहलाती है: a) Painting / पेंटिंग b) Varnishing / वार्निशिंग c) Priming / प्राइमिंग d) Polishing / पॉलिशिंग 3. Which of the following is a cool color?3. निम्नलिखित में से कौन सा एक ठंडा रंग है? a) Red / लाल b) Yellow / पीला c) Orange / नारंगी d) Blue / नीला 4. What is the main purpose of a ‘thinner’ in paint?4. पेंट में ‘थिनर’ का मुख्य उद्देश्य क्या है? a) To add color / रंग जोड़ना b) To make the paint thicker / पेंट को गाढ़ा करना c) To adjust the viscosity for easy application / आसान अनुप्रयोग के लिए चिपचिपाहट को समायोजित करना d) To make the paint dry faster / पेंट को तेजी से सुखाना 5. The tool used for applying paint to large flat areas like walls is a:5. दीवारों जैसी बड़ी सपाट सतहों पर पेंट लगाने के लिए उपयोग किया जाने वाला उपकरण है: a) Roller / रोलर b) Small brush / छोटा ब्रश c) Putty knife / पुट्टी चाकू d) Scraper / स्क्रैपर 6. A ‘drop cloth’ is used in painting to:6. पेंटिंग में एक ‘ड्रॉप क्लॉथ’ का उपयोग किया जाता है: a) Clean brushes / ब्रश साफ करने के लिए b) Mix paint / पेंट मिलाने के लिए c) Protect floors and furniture from paint drips / फर्श और फर्नीचर को पेंट के टपकाव से बचाने के लिए d) Apply textured paint / बनावट वाला पेंट लगाने के लिए 7. A paint defect where the top coat peels away from the undercoat is known as:7. एक पेंट दोष जिसमें टॉप कोट अंडरकोट से छिल जाता है, कहलाता है: a) Cracking / क्रैकिंग b) Blistering / फफोले पड़ना c) Flaking or Peeling / पपड़ी बनना या छिलना d) Wrinkling / झुर्रियाँ पड़ना 8. The purpose of a ‘drier’ in oil-based paint is to:8. तेल आधारित पेंट में ‘ड्रायर’ का उद्देश्य है: a) Make the paint thinner / पेंट को पतला बनाना b) Add color to the paint / पेंट में रंग जोड़ना c) Speed up the drying process / सूखने की प्रक्रिया को तेज करना d) Make the paint waterproof / पेंट को जलरोधक बनाना 9. What is a key safety measure when working at heights?9. ऊंचाइयों पर काम करते समय एक प्रमुख सुरक्षा उपाय क्या है? a) Use a stable ladder or scaffold and maintain three points of contact / एक स्थिर सीढ़ी या मचान का उपयोग करना और तीन संपर्क बिंदु बनाए रखना b) Work as fast as possible / जितनी जल्दी हो सके काम करना c) Overreach to save time / समय बचाने के लिए बहुत अधिक पहुंचना d) Carry all tools in hand while climbing / चढ़ते समय सभी उपकरण हाथ में रखना 10. A paint that is highly resistant to weather and used for exterior surfaces is:10. एक पेंट जो मौसम के प्रति अत्यधिक प्रतिरोधी है और बाहरी सतहों के लिए उपयोग किया जाता है, वह है: a) Distemper / डिस्टेंपर b) Emulsion paint / इमल्शन पेंट c) Enamel paint or Exterior grade emulsion / इनेमल पेंट या एक्सटीरियर ग्रेड इमल्शन d) Primer / प्राइमर 11. A ‘tint’ is created by adding _______ to a color.11. एक रंग में _______ मिलाकर एक ‘टिंट’ बनाया जाता है। a) Black / काला b) Grey / ग्रे c) White / सफेद d) Its complementary color / इसका पूरक रंग 12. The final coat of paint is called the:12. पेंट का अंतिम कोट कहलाता है: a) Primer coat / प्राइमर कोट b) Undercoat / अंडरकोट c) Finish coat / फिनिश कोट d) Base coat / बेस कोट 13. The tool used for filling cracks and holes with putty is a:13. दरारों और छेदों को पुट्टी से भरने के लिए उपयोग किया जाने वाला उपकरण है: a) Scraper / स्क्रैपर b) Putty knife / पुट्टी चाकू c) Paint brush / पेंट ब्रश d) Roller / रोलर 14. Mixing yellow and blue produces:14. पीले और नीले को मिलाने से बनता है: a) Green / हरा b) Orange / नारंगी c) Violet / बैंगनी d) Red / लाल 15. What is the most important PPE for protecting your eyes?15. आपकी आंखों की सुरक्षा के लिए सबसे महत्वपूर्ण पीपीई क्या है? a) Helmet / हेलमेट b) Gloves / दस्ताने c) Safety glasses or goggles / सुरक्षा चश्मा या गॉगल्स d) Earmuffs / ईयरमफ्स 16. The purpose of a ‘masking tape’ is to:16. ‘मास्किंग टेप’ का उद्देश्य है: a) Join two surfaces / दो सतहों को जोड़ना b) Protect areas from being painted and create sharp lines / क्षेत्रों को पेंट होने से बचाना और तेज रेखाएं बनाना c) Repair holes / छेदों की मरम्मत करना d) Clean the surface / सतह को साफ करना 17. A ‘shade’ of a color is created by adding:17. एक रंग का ‘शेड’ मिलाकर बनाया जाता है: a) White / सफेद b) Black / काला c) Grey / ग्रे d) Its complementary color / इसका पूरक रंग 18. The part of a paint brush between the handle and the bristles is the:18. एक पेंट ब्रश का वह हिस्सा जो हैंडल और ब्रिसल्स के बीच होता है, वह है: a) Ferrule / फेरूल b) Stock / स्टॉक c) Tip / टिप d) Heel / हील 19. The process of applying patterns using a pre-cut sheet is called:19. एक पूर्व-कटी हुई शीट का उपयोग करके पैटर्न लगाने की प्रक्रिया कहलाती है: a) Spraying / स्प्रेइंग b) Rolling / रोलिंग c) Stenciling / स्टेंसिलिंग d) Brushing / ब्रशिंग 20. What is a key safety practice in a paint storage area?20. एक पेंट भंडारण क्षेत्र में एक प्रमुख सुरक्षा अभ्यास क्या है? a) No smoking and no open flames / धूम्रपान नहीं और कोई खुली लपटें नहीं b) Keep the area warm / क्षेत्र को गर्म रखना c) Stack cans very high / कैन को बहुत ऊंचा ढेर लगाना d) Keep the area dark / क्षेत्र को अंधेरा रखना 21. A paint finish that has a low level of shine, between matte and satin, is:21. एक पेंट फिनिश जिसमें मैट और साटन के बीच कम स्तर की चमक होती है, वह है: a) Gloss / ग्लॉस b) High-gloss / हाई-ग्लॉस c) Eggshell or Satin / एगशेल या साटन d) Matte / मैट 22. The tool used for cleaning a surface from dust before painting is:22. पेंटिंग से पहले सतह को धूल से साफ करने के लिए उपयोग किया जाने वाला उपकरण है: a) A wet cloth / एक गीला कपड़ा b) A dry brush or tack cloth / एक सूखा ब्रश या टैक क्लॉथ c) A roller / एक रोलर d) A putty knife / एक पुट्टी चाकू 23. A color opposite red on the color wheel is:23. रंग चक्र पर लाल के विपरीत एक रंग है: a) Yellow / पीला b) Blue / नीला c) Green / हरा d) Orange / नारंगी 24. What should be done before painting a metal surface?24. एक धातु की सतह को पेंट करने से पहले क्या किया जाना चाहिए? a) Apply a thick coat of paint directly / सीधे पेंट का एक मोटा कोट लगाना b) Clean, de-grease, and apply a suitable primer / साफ करना, डी-ग्रीस करना, और एक उपयुक्त प्राइमर लगाना c) Wash with water only / केवल पानी से धोना d) Apply polish / पॉलिश लगाना 25. Class C fire involves:25. क्लास C की आग में शामिल हैं: a) Wood, paper / लकड़ी, कागज b) Oils, paints / तेल, पेंट c) Live electrical equipment / लाइव विद्युत उपकरण d) Metals like magnesium / मैग्नीशियम जैसी धातुएं ← Previous Next → Finish Test / टेस्ट खत्म करें