ITI Engineering Drawing 1st Year Mock Test – 5 July 18, 2025 ITI Engineering Drawing 1st Year Mock Test – 5 | Instant Feedback ITI Engineering Drawing 1st Year Mock Test – 5 आईटीआई इंजीनियरिंग ड्राइंग प्रथम वर्ष मॉक टेस्ट – 5 Time Left: 30:00 Test Complete! 1. The symbol for third-angle projection is:1. थर्ड-एंगल प्रोजेक्शन का प्रतीक है: a) Two concentric squares / दो संकेंद्रित वर्ग b) A truncated cone with the front view and side view / फ्रंट व्यू और साइड व्यू के साथ एक छोटा शंकु c) A triangle inside a circle / एक वृत्त के अंदर एक त्रिभुज d) Two interlocking circles / दो इंटरलॉकिंग वृत्त 2. An ellipse has how many foci (focal points)?2. एक दीर्घवृत्त में कितने फोकस (फोकल बिंदु) होते हैं? a) One / एक b) Two / दो c) Three / तीन d) Four / चार 3. A hexagonal nut has _______ sides.3. एक षट्कोणीय नट में _______ भुजाएँ होती हैं। a) 4 b) 5 c) 6 d) 8 4. In a drawing, a thin chain line thick at the ends is used for:4. एक ड्राइंग में, सिरों पर मोटी एक पतली चेन लाइन का उपयोग किया जाता है: a) Center lines / केंद्र रेखाओं के लिए b) Cutting plane lines / कटिंग प्लेन लाइनों के लिए c) Hidden lines / छिपी हुई रेखाओं के लिए d) Outlines / रूपरेखाओं के लिए 5. The front view of a pentagonal prism standing on its base on H.P. is a:5. H.P. पर अपने आधार पर टिके हुए एक पंचकोणीय प्रिज्म का फ्रंट व्यू है: a) Pentagon / एक पंचभुज b) Rectangle / एक आयत c) Triangle / एक त्रिभुज d) Circle / एक वृत्त 6. The standard angle for hatching lines in a sectional view is:6. एक सेक्शनल व्यू में हैचिंग लाइनों के लिए मानक कोण है: a) 30° b) 60° c) 45° d) 90° 7. A drawing that shows an object in a 3D pictorial view is a(n):7. एक ड्राइंग जो किसी वस्तु को 3D चित्रात्मक दृश्य में दिखाती है, वह है: a) Orthographic drawing / ऑर्थोग्राफिक ड्राइंग b) Isometric drawing / आइसोमेट्रिक ड्राइंग c) Sectional drawing / सेक्शनल ड्राइंग d) Plan / प्लान 8. The purpose of a washer is to:8. एक वॉशर का उद्देश्य है: a) Lock the nut in place / नट को जगह पर लॉक करना b) Distribute the load over a larger area / भार को एक बड़े क्षेत्र में वितरित करना c) Make the joint look better / जोड़ को बेहतर दिखाना d) Cut threads / चूड़ियाँ काटना 9. The R.F. of an enlarging scale is always:9. एक बड़ा करने वाले पैमाने का R.F. हमेशा होता है: a) Less than 1 / 1 से कम b) Equal to 1 / 1 के बराबर c) Greater than 1 / 1 से अधिक d) Zero / शून्य 10. The first aid for a person who has fainted is to:10. बेहोश हुए व्यक्ति के लिए प्राथमिक उपचार है: a) Make them sit up immediately / उन्हें तुरंत बैठा देना b) Give them something to eat / उन्हें कुछ खाने के लिए देना c) Lay them down and raise their legs slightly / उन्हें लिटा देना और उनके पैरों को थोड़ा ऊपर उठाना d) Splash water on their face / उनके चेहरे पर पानी के छींटे मारना 11. A drawing showing the individual components of an assembly is a:11. एक असेंबली के अलग-अलग घटकों को दिखाने वाला एक चित्र है: a) Assembly drawing / असेंबली ड्राइंग b) Detail drawing / डिटेल ड्राइंग c) Schematic drawing / योजनाबद्ध ड्राइंग d) Block diagram / ब्लॉक आरेख 12. In a half-section view, how much of the object is shown as sectioned?12. एक हाफ-सेक्शन व्यू में, वस्तु का कितना हिस्सा सेक्शन में दिखाया जाता है? a) One quarter / एक चौथाई b) One half / आधा c) Three quarters / तीन चौथाई d) The whole object / पूरी वस्तु 13. The tool used for cutting internal threads in a hole is a:13. एक छेद में आंतरिक चूड़ियाँ काटने के लिए उपयोग किया जाने वाला उपकरण है: a) Die / डाई b) Tap / टैप c) Drill / ड्रिल d) Reamer / रीमर 14. Which projection system is standard in India?14. भारत में कौन सी प्रोजेक्शन प्रणाली मानक है? a) First-angle projection / फर्स्ट-एंगल प्रोजेक्शन b) Second-angle projection / सेकंड-एंगल प्रोजेक्शन c) Third-angle projection / थर्ड-एंगल प्रोजेक्शन d) Fourth-angle projection / फोर्थ-एंगल प्रोजेक्शन 15. A scale of 1:2 means the drawing is _______ the actual object.15. 1:2 के पैमाने का मतलब है कि ड्राइंग वास्तविक वस्तु का _______ है। a) Half the size of / आधे आकार का b) Double the size of / दोगुने आकार का c) The same size as / समान आकार का d) One-fourth the size of / एक-चौथाई आकार का 16. The symbol ‘M’ before a dimension (e.g., M12) indicates a:16. एक विमा से पहले ‘M’ प्रतीक (जैसे, M12) इंगित करता है: a) Metric thread / मीट्रिक थ्रेड b) Minor diameter / माइनर व्यास c) Material type / सामग्री का प्रकार d) Module of a gear / एक गियर का मॉड्यूल 17. A fire involving flammable metals is a:17. ज्वलनशील धातुओं से जुड़ी एक आग है: a) Class A fire / क्लास A की आग b) Class B fire / क्लास B की आग c) Class C fire / क्लास C की आग d) Class D fire / क्लास D की आग 18. The top view of an object shows its length and:18. एक वस्तु का टॉप व्यू उसकी लंबाई और दिखाता है: a) Height / ऊंचाई b) Width or Depth / चौड़ाई या गहराई c) Thickness / मोटाई d) Angle / कोण 19. In lettering, the ratio of height to width for most letters is generally:19. अक्षर-लेखन में, अधिकांश अक्षरों के लिए ऊंचाई से चौड़ाई का अनुपात आम तौर पर होता है: a) 1:1 b) 7:5 or 7:4 / 7:5 या 7:4 c) 5:7 d) 2:1 20. The symbol used for a counterbore is:20. एक काउंटरबोर के लिए उपयोग किया जाने वाला प्रतीक है: a) A ‘V’ shape / एक ‘V’ आकार b) A square or rectangle shape / एक वर्ग या आयत आकार c) A circle / एक वृत्त d) A triangle / एक त्रिभुज 21. The main purpose of a title block is to provide:21. एक टाइटल ब्लॉक का मुख्य उद्देश्य प्रदान करना है: a) Decorative border / सजावटी बॉर्डर b) A space for notes / नोट्स के लिए एक जगह c) Identification and key information about the drawing / ड्राइंग के बारे में पहचान और मुख्य जानकारी d) A list of tools / औजारों की एक सूची 22. Which instrument is essential for drawing accurate horizontal lines?22. सटीक क्षैतिज रेखाएँ खींचने के लिए कौन सा उपकरण आवश्यक है? a) Compass / कम्पास b) T-Square or Mini Drafter / टी-स्क्वायर या मिनी ड्राफ्टर c) Protractor / प्रोट्रैक्टर d) French Curve / फ्रेंच कर्व 23. In an isometric view, circles appear as:23. एक आइसोमेट्रिक व्यू में, वृत्त दिखाई देते हैं: a) Circles / वृत्त के रूप में b) Ellipses / दीर्घवृत्त के रूप में c) Parabolas / परवलय के रूप में d) Straight lines / सीधी रेखाओं के रूप में 24. What is the primary purpose of an eraser shield?24. एक इरेज़र शील्ड का प्राथमिक उद्देश्य क्या है? a) To protect the drawing sheet from tearing / ड्राइंग शीट को फटने से बचाने के लिए b) To erase small areas accurately without disturbing adjacent lines / आसन्न रेखाओं को परेशान किए बिना छोटे क्षेत्रों को सटीक रूप से मिटाने के लिए c) To clean the eraser / इरेज़र को साफ करने के लिए d) To act as a scale / एक पैमाने के रूप में कार्य करने के लिए 25. What is the most important safety rule in a workshop?25. एक वर्कशॉप में सबसे महत्वपूर्ण सुरक्षा नियम क्या है? a) Work fast / तेजी से काम करना b) Use damaged tools / क्षतिग्रस्त औजारों का उपयोग करना c) Safety first, work second / पहले सुरक्षा, फिर काम d) Wear loose clothing / ढीले कपड़े पहनना ← Previous Next → Finish Test / टेस्ट खत्म करें