ITI Engineering Drawing 1st Year Mock Test – 4 July 18, 2025 ITI Engineering Drawing 1st Year Mock Test – 4 | Instant Feedback ITI Engineering Drawing 1st Year Mock Test – 4 आईटीआई इंजीनियरिंग ड्राइंग प्रथम वर्ष मॉक टेस्ट – 4 Time Left: 30:00 Test Complete! 1. A mini-drafter combines the functions of:1. एक मिनी-ड्राफ्टर किनके कार्यों को जोड़ता है? a) T-square, set squares, and protractor / टी-स्क्वायर, सेट स्क्वायर, और प्रोट्रैक्टर b) Compass and divider / कम्पास और डिवाइडर c) Scale and French curve / पैमाना और फ्रेंच कर्व d) Eraser and sharpener / इरेज़र और शार्पनर 2. A cutting plane line is represented by:2. एक कटिंग प्लेन लाइन को दर्शाया जाता है: a) A continuous thin line / एक सतत पतली रेखा b) A dashed line / एक धराशायी रेखा c) A chain thin line, thick at the ends / एक चेन पतली रेखा, सिरों पर मोटी d) A zigzag line / एक ज़िगज़ैग रेखा 3. In orthographic projection, the Front View is projected onto the:3. ऑर्थोग्राफिक प्रोजेक्शन में, फ्रंट व्यू को किस पर प्रक्षेपित किया जाता है? a) Horizontal Plane (H.P.) / क्षैतिज तल (H.P.) b) Vertical Plane (V.P.) / ऊर्ध्वाधर तल (V.P.) c) Profile Plane (P.P.) / प्रोफाइल तल (P.P.) d) Ground Line (G.L.) / ग्राउंड लाइन (G.L.) 4. The dimensioning system where all dimensions are written horizontally is the:4. वह विमांकन प्रणाली जिसमें सभी विमाएं क्षैतिज रूप से लिखी जाती हैं, वह है: a) Aligned system / अलाइन्ड सिस्टम b) Unidirectional system / यूनिडायरेक्शनल सिस्टम c) Parallel system / पैरेलल सिस्टम d) Chain system / चेन सिस्टम 5. A nut which can be easily operated by hand is a:5. एक नट जिसे हाथ से आसानी से संचालित किया जा सकता है, वह है: a) Hexagonal nut / षट्कोणीय नट b) Square nut / वर्ग नट c) Cap nut / कैप नट d) Wing nut / विंग नट 6. In isometric projection, the lines are drawn at what percentage of their true length?6. आइसोमेट्रिक प्रोजेक्शन में, रेखाओं को उनकी वास्तविक लंबाई के कितने प्रतिशत पर खींचा जाता है? a) 100% b) Approximately 82% / लगभग 82% c) 50% d) 122% 7. The recommended size for a title block on a drawing sheet as per BIS is:7. BIS के अनुसार एक ड्राइंग शीट पर एक टाइटल ब्लॉक का अनुशंसित आकार है: a) 100 mm x 50 mm b) 150 mm x 100 mm c) 185 mm x 65 mm d) 200 mm x 75 mm 8. The most common type of rivet head used in general fabrication is the:8. सामान्य फैब्रिकेशन में उपयोग किया जाने वाला सबसे आम प्रकार का रिवेट हेड है: a) Snap head / स्नैप हेड b) Pan head / पैन हेड c) Countersunk head / काउंटरसंक हेड d) Flat head / फ्लैट हेड 9. The top view of a triangular prism resting on its base on the H.P. is a:9. H.P. पर अपने आधार पर टिके हुए एक त्रिकोणीय प्रिज्म का टॉप व्यू है: a) Rectangle / एक आयत b) Square / एक वर्ग c) Triangle / एक त्रिभुज d) Circle / एक वृत्त 10. To divide a circle into 12 equal parts, you can step off the _______ around the circumference.10. एक वृत्त को 12 बराबर भागों में विभाजित करने के लिए, आप परिधि के साथ _______ को स्टेप ऑफ कर सकते हैं। a) Diameter / व्यास b) Radius / त्रिज्या c) Chord / जीवा d) Arc length / चाप की लंबाई 11. In a half-section view, the object is imagined to be cut:11. एक हाफ-सेक्शन व्यू में, वस्तु को काटा हुआ माना जाता है: a) Fully through the center / केंद्र से पूरी तरह से b) One-quarter of the way through / एक-चौथाई रास्ते से c) Three-quarters of the way through / तीन-चौथाई रास्ते से d) Not at all / बिल्कुल नहीं 12. The angle of a standard metric thread is:12. एक मानक मीट्रिक थ्रेड का कोण है: a) 55° b) 60° c) 45° d) 90° 13. An enlarging scale has an R.F. that is:13. एक बड़ा करने वाले पैमाने का R.F. होता है: a) Less than 1 / 1 से कम b) Equal to 1 / 1 के बराबर c) Greater than 1 / 1 से अधिक d) Zero / शून्य 14. What is a key safety practice in the drawing hall?14. ड्राइंग हॉल में एक प्रमुख सुरक्षा अभ्यास क्या है? a) Keep instruments in their proper places / उपकरणों को उनके उचित स्थानों पर रखना b) Handle sharp-pointed instruments with care / तेज-नुकीले उपकरणों को सावधानी से संभालना c) Keep the drawing board clean / ड्राइंग बोर्ड को साफ रखना d) All of the above / उपरोक्त सभी 15. The front view of a square pyramid resting on its base on H.P. is a:15. H.P. पर अपने आधार पर टिके हुए एक वर्ग पिरामिड का फ्रंट व्यू है: a) Square / एक वर्ग b) Triangle / एक त्रिभुज c) Rectangle / एक आयत d) Circle / एक वृत्त 16. The main purpose of a washer is to:16. एक वॉशर का मुख्य उद्देश्य है: a) Lock the nut / नट को लॉक करना b) Distribute the load over a larger area / भार को एक बड़े क्षेत्र में वितरित करना c) Increase the friction / घर्षण बढ़ाना d) Make the joint look good / जोड़ को अच्छा दिखाना 17. In the aligned system of dimensioning, the dimension text is placed:17. विमांकन की अलाइन्ड प्रणाली में, विमा टेक्स्ट रखा जाता है: a) Always horizontally / हमेशा क्षैतिज रूप से b) Parallel to the dimension line / विमा रेखा के समानांतर c) Always vertically / हमेशा ऊर्ध्वाधर रूप से d) At the end of the line / रेखा के अंत में 18. The tool used for cutting external threads is a:18. बाहरी चूड़ियाँ काटने के लिए उपयोग किया जाने वाला उपकरण है: a) Tap / टैप b) Reamer / रीमर c) Die / डाई d) File / फाइल 19. In lettering, “single stroke” means:19. अक्षर-लेखन में, “सिंगल स्ट्रोक” का अर्थ है: a) The letters are written without lifting the pencil / अक्षर पेंसिल को उठाए बिना लिखे जाते हैं b) The thickness of the line is obtained in one stroke of the pencil / रेखा की मोटाई पेंसिल के एक स्ट्रोक में प्राप्त की जाती है c) Only one type of letter is used / केवल एक प्रकार के अक्षर का उपयोग किया जाता है d) All letters are of the same size / सभी अक्षर एक ही आकार के होते हैं 20. Which material is known for its excellent corrosion resistance?20. कौन सी सामग्री अपने उत्कृष्ट संक्षारण प्रतिरोध के लिए जानी जाती है? a) Mild Steel / माइल्ड स्टील b) Cast Iron / कच्चा लोहा c) Stainless Steel / स्टेनलेस स्टील d) High Carbon Steel / उच्च कार्बन स्टील 21. The most important rule before using any power tool is to:21. किसी भी पावर टूल का उपयोग करने से पहले सबसे महत्वपूर्ण नियम है: a) Check the power cord for damage / क्षति के लिए पावर कॉर्ड की जांच करना b) Ensure all safety guards are in place / यह सुनिश्चित करना कि सभी सुरक्षा गार्ड अपनी जगह पर हैं c) Read the instruction manual / निर्देश मैनुअल पढ़ना d) All of the above / उपरोक्त सभी 22. The orthographic projection of an object consists of at least:22. किसी वस्तु के ऑर्थोग्राफिक प्रोजेक्शन में कम से कम होते हैं: a) One view / एक व्यू b) Two views (e.g., Front View and Top View) / दो व्यू (जैसे, फ्रंट व्यू और टॉप व्यू) c) Four views / चार व्यू d) Five views / पांच व्यू 23. A scale of R.F. = 1 means the drawing is:23. R.F. = 1 के पैमाने का मतलब है कि ड्राइंग है: a) Half size / आधे आकार की b) Double size / दोगुने आकार की c) Full size / पूर्ण आकार की d) Ten times size / दस गुना आकार की 24. What is the main purpose of an eraser shield?24. एक इरेज़र शील्ड का मुख्य उद्देश्य क्या है? a) To sharpen the eraser / इरेज़र को तेज करना b) To protect adjacent lines while erasing a specific line / एक विशिष्ट रेखा को मिटाते समय आसन्न रेखाओं की रक्षा करना c) To clean the eraser / इरेज़र को साफ करना d) To hold the eraser / इरेज़र को पकड़ना 25. A line touching a curve at a point is called a:25. एक वक्र को एक बिंदु पर छूने वाली एक रेखा कहलाती है: a) Chord / जीवा b) Tangent / स्पर्शरेखा c) Secant / छेदक रेखा d) Normal / नॉर्मल ← Previous Next → Finish Test / टेस्ट खत्म करें