ITI Draughtsman Civil 1st Year Mock Test – 2 July 17, 2025 ITI Draughtsman Civil 1st Year Mock Test – 2 | Instant Feedback ITI Draughtsman Civil 1st Year Mock Test – 2 आईटीआई ड्राफ्ट्समैन सिविल प्रथम वर्ष मॉक टेस्ट – 2 Time Left: 30:00 Test Complete! 1. The method of representing a 3D object using multiple 2D views is called:1. कई 2D दृश्यों का उपयोग करके 3D वस्तु को प्रस्तुत करने की विधि कहलाती है: a) Isometric Projection / आइसोमेट्रिक प्रोजेक्शन b) Perspective Projection / पर्सपेक्टिव प्रोजेक्शन c) Oblique Projection / ऑब्लिक प्रोजेक्शन d) Orthographic Projection / ऑर्थोग्राफिक प्रोजेक्शन 2. For a first-class brick, the water absorption after 24 hours immersion should not exceed:2. प्रथम श्रेणी की ईंट के लिए, 24 घंटे डुबोने के बाद जल अवशोषण इससे अधिक नहीं होना चाहिए: a) 10% of its dry weight / इसके सूखे वजन का 10% b) 15% of its dry weight / इसके सूखे वजन का 15% c) 20% of its dry weight / इसके सूखे वजन का 20% d) 25% of its dry weight / इसके सूखे वजन का 25% 3. A foundation which covers the entire area under a building is a:3. एक नींव जो एक इमारत के नीचे के पूरे क्षेत्र को कवर करती है, वह है: a) Strip foundation / स्ट्रिप नींव b) Isolated footing / आइसोलेटेड फुटिंग c) Raft foundation / राफ्ट नींव d) Pile foundation / पाइल नींव 4. The wedge-shaped stone at the crown of an arch is called the:4. एक मेहराब के शीर्ष पर कील के आकार का पत्थर कहलाता है: a) Springer / स्प्रिंगर b) Voussoir / वौसर c) Keystone / कीस्टोन d) Abutment / एबटमेंट 5. A line in a drawing made of long dashes and short dashes represents a:5. एक ड्राइंग में लंबी और छोटी डैश से बनी एक रेखा दर्शाती है: a) Hidden line / छिपी हुई रेखा b) Center line / केंद्र रेखा c) Dimension line / विमा रेखा d) Cutting plane line / कटिंग प्लेन लाइन 6. Stone masonry using well-dressed stones of uniform size and shape is called:6. एक समान आकार और आकृति के अच्छी तरह से तैयार किए गए पत्थरों का उपयोग करके पत्थर की चिनाई कहलाती है: a) Rubble masonry / रबल मेसनरी b) Ashlar masonry / एशलर मेसनरी c) Flint masonry / फ्लिंट मेसनरी d) Dry stone masonry / ड्राई स्टोन मेसनरी 7. What does OPC stand for?7. ओपीसी (OPC) का क्या अर्थ है? a) Ordinary Portland Cement / साधारण पोर्टलैंड सीमेंट b) Original Portland Cement / ओरिजिनल पोर्टलैंड सीमेंट c) Old Portland Cement / ओल्ड पोर्टलैंड सीमेंट d) Opaque Portland Cement / अपारदर्शी पोर्टलैंड सीमेंट 8. The Representative Fraction (R.F.) for a scale of 1cm = 2m is:8. 1सेमी = 2मी के पैमाने के लिए निरूपक भिन्न (R.F.) है: a) 1/2 b) 1/20 c) 1/200 d) 1/2000 9. The sloping members of a pitched roof that support the roof covering are the:9. एक ढलान वाली छत के ढलान वाले सदस्य जो छत के आवरण को सहारा देते हैं, वे हैं: a) Purlins / पर्लिन b) Rafters / राफ्टर्स c) Ridge / रिज d) Eaves / ईव्स 10. The instrument used to establish a horizontal line of sight is a:10. एक क्षैतिज दृष्टि रेखा स्थापित करने के लिए उपयोग किया जाने वाला उपकरण है: a) Theodolite / थियोडोलाइट b) Compass / कम्पास c) Level / लेवल d) Chain / चेन 11. A mixture of sand, cement, and water is called:11. रेत, सीमेंट और पानी का मिश्रण कहलाता है: a) Concrete / कंक्रीट b) Mortar / मोर्टार c) Grout / ग्राउट d) Plaster / प्लास्टर 12. A roof that slopes in all four directions is a:12. एक छत जो सभी चार दिशाओं में ढलान वाली होती है, वह है: a) Gable roof / गेबल छत b) Lean-to roof / लीन-टू छत c) Flat roof / सपाट छत d) Hip roof / हिप छत 13. The vertical part of a step in a staircase is called the:13. एक सीढ़ी में एक स्टेप का ऊर्ध्वाधर भाग कहलाता है: a) Tread / ट्रेड b) Riser / राइजर c) Nosing / नोजिंग d) Flight / फ्लाइट 14. What is the initial setting time for ordinary Portland cement?14. साधारण पोर्टलैंड सीमेंट के लिए प्रारंभिक सेटिंग समय क्या है? a) Not less than 30 minutes / 30 मिनट से कम नहीं b) Not more than 30 minutes / 30 मिनट से अधिक नहीं c) Exactly 60 minutes / ठीक 60 मिनट d) Not less than 10 hours / 10 घंटे से कम नहीं 15. A flooring made by mixing marble chips with cement is called:15. संगमरमर के चिप्स को सीमेंट के साथ मिलाकर बनाई गई एक फर्श कहलाती है: a) Concrete flooring / कंक्रीट फर्श b) Tiled flooring / टाइल फर्श c) Terrazzo flooring / टेराज़ो फर्श d) Wooden flooring / लकड़ी का फर्श 16. In first-angle projection, the plan (top view) is drawn:16. फर्स्ट-एंगल प्रोजेक्शन में, प्लान (टॉप व्यू) खींचा जाता है: a) Above the elevation / एलिवेशन के ऊपर b) Below the elevation / एलिवेशन के नीचे c) To the left of the elevation / एलिवेशन के बाईं ओर d) To the right of the elevation / एलिवेशन के दाईं ओर 17. The temporary framework used to support fresh concrete is:17. ताजा कंक्रीट को सहारा देने के लिए उपयोग किया जाने वाला अस्थायी ढांचा है: a) Scaffolding / स्कैफोल्डिंग b) Shoring / शोरिंग c) Formwork or Shuttering / फॉर्मवर्क या शटरिंग d) Underpinning / अंडरपिनिंग 18. The strength of concrete primarily depends on the:18. कंक्रीट की मजबूती मुख्य रूप से इस पर निर्भर करती है: a) Quantity of sand / रेत की मात्रा b) Quantity of aggregate / एग्रीगेट की मात्रा c) Water-cement ratio / पानी-सीमेंट अनुपात d) Method of mixing / मिश्रण की विधि 19. The inner curve of an arch is known as the:19. एक मेहराब के आंतरिक वक्र को कहा जाता है: a) Extrados / एक्सट्रैडोस b) Intrados / इंट्रैडोस c) Soffit / सॉफिट d) Spandrel / स्पैंड्रेल 20. Which pencil grade is the hardest among these?20. इनमें से कौन सा पेंसिल ग्रेड सबसे कठोर है? a) HB b) 2B c) 4H d) H 21. Before beginning excavation, it is most important to check for:21. खुदाई शुरू करने से पहले, किसकी जांच करना सबसे महत्वपूर्ण है: a) The weather forecast / मौसम का पूर्वानुमान b) Underground utilities like pipes and cables / पाइप और केबल जैसी भूमिगत उपयोगिताएँ c) The availability of workers / श्रमिकों की उपलब्धता d) The time of day / दिन का समय 22. What is the main purpose of a title block on a drawing sheet?22. एक ड्राइंग शीट पर एक टाइटल ब्लॉक का मुख्य उद्देश्य क्या है? a) To provide all necessary information about the drawing / ड्राइंग के बारे में सभी आवश्यक जानकारी प्रदान करना b) To make the drawing look official / ड्राइंग को आधिकारिक दिखाने के लिए c) To list the tools required / आवश्यक उपकरणों की सूची बनाना d) To provide space for signatures only / केवल हस्ताक्षरों के लिए जगह प्रदान करना 23. The horizontal distance between two consecutive contour lines is called:23. दो लगातार कंटूर रेखाओं के बीच की क्षैतिज दूरी कहलाती है: a) Contour Interval / कंटूर अंतराल b) Horizontal Equivalent / क्षैतिज समतुल्य c) Contour Gradient / कंटूर ग्रेडिएंट d) Reduced Level / समानित तल 24. What is a “king post” in a roof truss?24. एक छत के ट्रस में एक “किंग पोस्ट” क्या है? a) The main horizontal beam / मुख्य क्षैतिज बीम b) The central vertical member / केंद्रीय ऊर्ध्वाधर सदस्य c) A sloping rafter / एक ढलान वाला राफ्टर d) A horizontal member connecting rafters / राफ्टर्स को जोड़ने वाला एक क्षैतिज सदस्य 25. Which type of foundation is suitable for a single column?25. एक एकल कॉलम के लिए किस प्रकार की नींव उपयुक्त है? a) Raft foundation / राफ्ट नींव b) Strip foundation / स्ट्रिप नींव c) Isolated footing / आइसोलेटेड फुटिंग d) Combined footing / कंबाइंड फुटिंग ← Previous Next → Finish Test / टेस्ट खत्म करें