ITI Surveyor 1st Year Mock Test – 9 July 17, 2025 ITI Surveyor 1st Year Mock Test – 9 | Instant Feedback ITI Surveyor 1st Year Mock Test – 9 आईटीआई सर्वेयर प्रथम वर्ष मॉक टेस्ट – 9 Time Left: 30:00 Test Complete! 1. Theodolite is an instrument used to measure:1. थियोडोलाइट एक उपकरण है जिसका उपयोग मापने के लिए किया जाता है: a) Only Horizontal Angles / केवल क्षैतिज कोण b) Only Vertical Angles / केवल ऊर्ध्वाधर कोण c) Both Horizontal and Vertical Angles / क्षैतिज और ऊर्ध्वाधर दोनों कोण d) Only Distances / केवल दूरियाँ 2. The process of turning the telescope about its vertical axis in the horizontal plane is called:2. दूरबीन को उसकी ऊर्ध्वाधर धुरी के चारों ओर क्षैतिज तल में घुमाने की प्रक्रिया कहलाती है: a) Transiting / ट्रांजिटिंग b) Swinging / स्विंगिंग c) Leveling / लेवलिंग d) Centering / सेंटरिंग 3. The line joining points of zero magnetic declination is known as:3. शून्य चुंबकीय दिक्पात के बिंदुओं को मिलाने वाली रेखा कहलाती है: a) Isogonic line / आइसोगोनिक रेखा b) Agonic line / एगोनिक रेखा c) Isoclinic line / आइसोक्लिनिक रेखा d) Aclinic line / एक्लिनिक रेखा 4. A key advantage of the Rise and Fall method over the H.I. method is that it provides a check on:4. एच.आई. विधि की तुलना में राइज़ एंड फॉल विधि का एक प्रमुख लाभ यह है कि यह इस पर एक जांच प्रदान करती है: a) The calculation of all intermediate sight R.L.s / सभी इंटरमीडिएट साइट आर.एल. की गणना b) The backsight readings only / केवल बैकसाइट रीडिंग c) The foresight readings only / केवल फोरसाइट रीडिंग d) The distance measurements / दूरी माप 5. Which surveying method is based on the principle of triangulation?5. कौन सी सर्वेक्षण विधि त्रिकोणीयकरण के सिद्धांत पर आधारित है? a) Compass Surveying / कम्पास सर्वेक्षण b) Leveling / लेवलिंग c) Chain Surveying / चेन सर्वेक्षण d) Plane Table Surveying / प्लेन टेबल सर्वेक्षण 6. The R.F. of a scale 1 cm = 1 km is:6. 1 सेमी = 1 किमी के पैमाने का R.F. है: a) 1/1000 b) 1/10000 c) 1/100000 d) 1/100 7. In a drawing, hidden edges are represented by:7. एक ड्राइंग में, छिपे हुए किनारों को दर्शाया जाता है: a) Continuous thick lines / सतत मोटी रेखाएं b) Continuous thin lines / सतत पतली रेखाएं c) Dashed lines / धराशायी रेखाएं d) Chain lines / चेन रेखाएं 8. The instrument used to draw parallel lines and measure angles is a:8. समानांतर रेखाएँ खींचने और कोण मापने के लिए उपयोग किया जाने वाला उपकरण है: a) Mini Drafter or T-square / मिनी ड्राफ्टर या टी-स्क्वायर b) Compass / कम्पास c) Protractor / प्रोट्रैक्टर d) French curves / फ्रेंच कर्व्स 9. An offset is a lateral measurement taken with respect to the:9. एक ऑफसेट किसके संबंध में लिया गया एक पार्श्व माप है: a) North direction / उत्तर दिशा b) Chain line / चेन लाइन c) Previous station / पिछला स्टेशन d) Benchmark / बेंचमार्क 10. The Quadrantal Bearing (RB) system measures angles from:10. चतुर्भुज बियरिंग (RB) प्रणाली कोणों को मापती है: a) North only / केवल उत्तर से b) South only / केवल दक्षिण से c) Either North or South, towards East or West / या तो उत्तर या दक्षिण से, पूर्व या पश्चिम की ओर d) The previous line / पिछली रेखा से 11. A staff reading taken on a point whose R.L. is to be determined is:11. एक बिंदु पर लिया गया एक स्टाफ रीडिंग जिसका R.L. निर्धारित किया जाना है, है: a) Backsight / बैकसाइट b) Foresight or Intermediate sight / फोरसाइट या इंटरमीडिएट साइट c) Benchmark reading / बेंचमार्क रीडिंग d) Change point / चेंज प्वाइंट 12. A chain that is longer than its standard length will cause a:12. एक चेन जो अपनी मानक लंबाई से लंबी है, इसका कारण बनेगी: a) Positive cumulative error (measured distance > actual distance) / धनात्मक संचयी त्रुटि (मापी गई दूरी > वास्तविक दूरी) b) Negative cumulative error (measured distance < actual distance) / ऋणात्मक संचयी त्रुटि (मापी गई दूरी < वास्तविक दूरी) c) Compensating error / प्रतिकारी त्रुटि d) No error / कोई त्रुटि नहीं 13. The main advantage of an Auto Level over a Dumpy Level is:13. एक डम्पी लेवल पर एक ऑटो लेवल का मुख्य लाभ है: a) It is more accurate / यह अधिक सटीक है b) It has an internal compensator, making leveling faster / इसमें एक आंतरिक कम्पेनसेटर होता है, जो लेवलिंग को तेज बनाता है c) It can measure angles / यह कोणों को माप सकता है d) It is cheaper / यह सस्ता है 14. What does the term “meridian” refer to in compass surveying?14. कम्पास सर्वेक्षण में “याम्योत्तर” (meridian) शब्द का क्या अर्थ है? a) A survey station / एक सर्वेक्षण स्टेशन b) A fixed reference direction (e.g., True North) / एक निश्चित संदर्भ दिशा (जैसे, यथार्थ उत्तर) c) The compass needle / कम्पास सुई d) The survey line / सर्वेक्षण रेखा 15. The three operations for setting up a plane table are centering, leveling, and:15. एक प्लेन टेबल स्थापित करने के लिए तीन ऑपरेशन हैं सेंटरिंग, लेवलिंग, और: a) Measuring / मापन b) Plotting / प्लॉटिंग c) Orientation / ओरिएंटेशन d) Ranging / रेंजिंग 16. The vertical line of a theodolite passes through:16. एक थियोडोलाइट की ऊर्ध्वाधर रेखा गुजरती है: a) The center of the horizontal circle / क्षैतिज वृत्त के केंद्र से b) The eyepiece / ऐपिस से c) The objective lens / ऑब्जेक्टिव लेंस से d) The foot screws / फुट स्क्रू से 17. A contour with U-shaped curves with convexity towards lower ground indicates a:17. निचली जमीन की ओर उत्तलता के साथ यू-आकार के वक्रों वाला एक कंटूर इंगित करता है: a) Hill / एक पहाड़ी b) Ridge / एक रिज c) Valley / एक घाटी d) Cliff / एक चट्टान 18. The title block of a drawing sheet should contain:18. एक ड्राइंग शीट के टाइटल ब्लॉक में होना चाहिए: a) Only the drawing number / केवल ड्राइंग नंबर b) Only the name of the surveyor / केवल सर्वेक्षक का नाम c) Title of the drawing, scale, date, and name of the drafter / ड्राइंग का शीर्षक, पैमाना, तारीख, और ड्राफ्टर का नाम d) Only the scale / केवल पैमाना 19. The two main types of errors in surveying are:19. सर्वेक्षण में दो मुख्य प्रकार की त्रुटियाँ हैं: a) Small and Large / छोटी और बड़ी b) Simple and Complex / सरल और जटिल c) Cumulative and Compensating / संचयी और प्रतिकारी d) Horizontal and Vertical / क्षैतिज और ऊर्ध्वाधर 20. Which instrument is used for finding the magnetic bearing of a line?20. एक रेखा का चुंबकीय दिक्मान ज्ञात करने के लिए किस उपकरण का उपयोग किया जाता है? a) Dumpy Level / डम्पी लेवल b) Theodolite / थियोडोलाइट c) Prismatic Compass / प्रिज्मीय कम्पास d) Plane Table / प्लेन टेबल 21. The first step of any survey is:21. किसी भी सर्वेक्षण का पहला कदम है: a) Calculation / गणना b) Plotting / प्लॉटिंग c) Field work / फील्ड वर्क d) Reconnaissance / रेकी (प्रारंभिक निरीक्षण) 22. If a staff reading on a point is low, it means the point is:22. यदि एक बिंदु पर स्टाफ रीडिंग कम है, तो इसका मतलब है कि बिंदु है: a) Higher / ऊंचा b) Lower / नीचा c) At the same level / समान स्तर पर d) A change point / एक चेंज प्वाइंट 23. In a surveyor’s compass, the graduated ring is attached to the:23. एक सर्वेक्षक कम्पास में, अंशांकित रिंग जुड़ी होती है: a) Box / बॉक्स से b) Needle / सुई से c) Tripod / तिपाई से d) Sighting vane / साइटिंग वेन से 24. What is the area of a square with a side length of 10m?24. 10 मीटर भुजा वाले एक वर्ग का क्षेत्रफल क्या है? a) 40 sq. m / 40 वर्ग मीटर b) 100 sq. m / 100 वर्ग मीटर c) 20 sq. m / 20 वर्ग मीटर d) 10 sq. m / 10 वर्ग मीटर 25. The most important quality of a surveyor is:25. एक सर्वेक्षक का सबसे महत्वपूर्ण गुण है: a) Speed / गति b) Honesty and accuracy / ईमानदारी और सटीकता c) Strength / शक्ति d) Good handwriting / अच्छी लिखावट ← Previous Next → Finish Test / टेस्ट खत्म करें